![](/images/new-backgrounds/1256124/256124153x1.webp)
Monitors | 67 |
Monitors
There is an output connector and insert connector on the rear panel for both monitor bus outputs.
Two monitor inserts and two monitor outputs on rear panel
1
2
3
4
Monitor channels (1 and 2)
Item Description
1pre switch This is the bus master pre-fader switch.
2monitor control knob This output level control gives continuous adjustment of the monitor output signal from +10dB to 4 (infinity/off).
3MUTE switch and red LED The MUTE switch mutes the monitor send output signal. The mute LED illuminates to show that the mute is on.
4SOLO switch and yellow LED The SOLO switch routes the monitor send signal to the mono PFL bus and stereo AFL buses. When the SOLO switch is on, the master meters are automatically used for solo metering. The solo LED illuminates to show when solo is on.
VeniceU Operator Manual