Samsung DVD-CM250H/XEF, DVD-CM250H/XEU manual Selecting the Colour Mode, OK or ❿, until

Page 24

VCR

Selecting the Colour Mode

	Language	: English
	Install
GB	User Set
GB	Auto Power Off	: Off
	Screen Messages	: On

User Set

Colour System	: Auto
NICAM	: On
IPC	: On

Auto

PAL MESECAM B/W

Before recording or playing back a cassette, you can select the required system standard.

Otherwise, the system automatically selects the reception standard when you select AUTO.

➢◆ When playing back a cassette, the standard is automatically selected by the DVD-VCR.

◆When you playback an NTSC-recorded tape on this DVD- VCR make a setting on the colour system according to your TV. If your TV is a PAL system only TV, set NTPB. If your TV is Multi System TV (NTSC 4.43 compatible), set NT4.43 and you can record NT4.43.

1After pressing the MENU, press the OK or ❿ . Result: The Setup menu is displayed.

2	Press the corresponding ,❷ buttons to select the
	User Set option.

3Press the OK or ❿ to select this option.

Result: The User Set menu is displayed.

4	Press the corresponding or ❷ buttons, until the Colour
	System option is selected.

5Press the OK or ❿ button to select Auto➝PAL➝MESECAM➝B/W.

Auto When playing back a cassette, the system standard is automatically selected by the DVD-VCR.

B/W Black and White

6On completion, press RETURN three time to exit the menu.

VCR

NICAM

Language : English

Install

User Set

Auto Power Off	: Off
Screen Messages	: On

User Set

Colour System	: Auto
NICAM	: On
IPC	: On

24

On Off

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound. Please refer to page 35.

1After pressing the MENU, press the OK or ❿ . Result: The Setup menu is displayed.

2	Press the corresponding ,❷ buttons to select the
	User Set option.

3Press the OK or ❿ to select this option.

Result: The User Set menu is displayed.

4	Press the corresponding		or ❷ buttons, until the NICAM
	options selected.

5	To...	Press	OK or ❿, until...

	Mono mode	Off is displayed.
		Off: Only set at this position to record
		the standard mono sound during a
		NICAM broadcast if the stereo sound is
		distorted due to inferior reception
		conditions.

	NICAM mode	On is displayed.
		On: Normally set at this position.

6On completion, press RETURN three times to exit the menu.

Image 24

Contents DVD-CM250 GB Contents Playing Back Symbols Safety Instructions Following illustrations represent precautionsDisc Type and Characteristics Disc MarkingsPlayback Region Number Front View of the DVD-VCR Rear View of the DVD-VCR10 11 12 Infrared Remote Control ShuttlePROG/TRK 33 UP 34 OKDisplay Indicators AccessoriesCopy mode indicator Deciding How to Connect DVD-VCR Your DVD-VCR is equipped with the following connectorsConnector Location Type Connecting DVD-VCR to the TV using the Coaxial Cable Connecting DVD-VCR to the TV using the Scart CableAV1EURO AV By means of 21-pin Scart Cable By means of RF Coaxial CableAV2 in By means of 21-pin Scart Cable Plug & Auto Set up Tuning Your Television for the DVD-VCR Deck Control Keys STANDBY/ON ButtonDVD Button VCR ButtonInserting Batteries in the Remote Control Find that the remote control is no longer working correctlyBasic TV Tuner Operations Copying from DVD to VCR Insert VHS TapeInsert a blank VHS videotape into the VCR deck Copy the DVD to VHS TapeSetting the Date and Time Setting the Menu LanguageOpen Menu Select LanguagePresetting the Stations Automatically Presetting the Stations Manually 13 To...ThenIf you Then Clearing a Preset Station Press the OK or ❿ to select a Manual Setup option Press the corresponding Result The TV Station Table menu is displayedChanging the Preset Station Table Setup option is selectedPreset TV programme is selected Selecting the RF OUT Sound Mode B/G-D/K Setting the DVD-VCR Output ChannelPress the or ❷ buttons, until the TV System option is SelectedSelecting the Colour Mode OK or ❿, untilIntelligent Picture Control Auto Power Off Off 1Hour 2Hour 3HourScreen Messages Selecting the Cassette TypePress OK or ❿, until E180 E240 300 E260Repeat Play VHS PlayDVD-VCR allows you to playback high quality S-VHS tapes Selecting the Recording Speed VCR Protecting a Recorded Cassette VCR Recording a Programme ImmediatelyIf you wish to cancel the recording before the end, press Recording a Programme with Automatic StopUsing the Timer Programming Feature Press ❿ to select the recording start timeRecording start time Press ❿ to select the recording speedChecking a Preset Recording Cancelling a Preset RecordingOn completion, press Return button Adjusting Picture Alignment Manually Playing a CassetteThen press Selecting the Audio Output Mode Playing a Cassette in Slow MotionOption Description You can play a cassette in slow motionPlaying a Sequence at Variable Speeds Searching for a Specific Sequence NextSeq Seq. etcIntro Scan Buttons, until the Intro Scan option is selectedUsing the Tape Counter Press InfoVCR Connecting an RCA Audio/Video Input Cable Recoding from Another VCR or Camcorder Audio Dubbing a Pre-recorded Cassette CD, DVDUsing the TV Buttons on the Remote Control Brand CodesButton Function Choosing a Connection Connection to an TelevisionComponent Video Jack Setting Up the Language Features Using the Disc Menu LanguageUsing the Audio Language Using the Subtitle LanguagePress the ,❷ buttons to select ‘English’ Setting Up the Audio Options ❿ buttonUse the ,❷ buttons to select the desired item Then press the OK or ❿ buttonSetting Up the Parental Control About the Change PasswordAbout the Rating Level Setting Up the Display Options Sends Component Interlace signal fromVideo Connections for DVD Connect S-Video Out to TVDVD Component Connections for DVD To Component Input on Your TVSpecial Playback Features Adjusting the Aspect Ratio EZ View To play back using aspect ratio DVDIf you are using a 169 TV For 169 aspect ratio discs For 43 aspect ratio discsIf you are using a 43 TV Displays the content of the DVD title in 43 aspect ratioFor 169 aspect ratio discs Letter Box Pan ScanWhen Playing a DVD During play, press the INFO. button on the remoteUsing the Angle button Using the Subtitle buttonChanging the Camera Angle Selecting the Subtitle LanguageUsing the Zoom DVD Want to zoom in onRepeat Chapter/Title Selecting the Audio LanguageDVD Using the Mark Function DVD Using the Mark Function DVDRecalling a Marked Scene Clearing a MarkMP3-CD Playback ButtonWMA Play WMA Disc PlaybackMP3/WMA Play Your MP3 or WMA files should be ISO 9660 or Joliet formatDo not try recording copyright protected MP3 files Program Play & Random Play Then press the OK buttonPicture CD Playback Thumbnail screenCD-R Jpeg Discs Setting the Delay Time Setting the Center SpeakerSetting the Surround Speakers Distance of a m Setting ms Distance of B mAbout Speaker Setup Center SpeakerSurround Speakers Front SpeakersTo Set the Speaker Balance To Test the SpeakersTo Set the Bass/Treble Press the Bass or Treble buttonSound Mode Function Sound ModeDolby Pro Logic Automatic Tuning Press and hold l or ❿❿l to begin automatic tuningListening to the Radio Tune in to the desired stationPresetting Stations Technical Specifications InputOutput Problems and Solutions VCR Troubleshooting Guide DVD Before requesting service troubleshootingProblem Action Ellas Greece Fourlis Trade A.E.B.E This Appliance is Distributed by