Samsung DVD-CM250H/XEU Using the TV Buttons on the Remote Control, Brand Codes, Button Function

Using the TV Buttons on the Remote Control VCR

Your DVD-VCR remote control will work with Samsung televisions and compatible brands.

To determine whether your television is compatible, follow the instructions below.

1Switch your television on.

2Point the remote control towards the television.

3Hold down the TV button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate numeric buttons.

Brand	Codes	Brand	Codes
SAMSUNG	01 to 06	PHILIPS	02, 20, 22
AKAI	09, 23	SABA	13, 14, 22 to 24
GRUNDIG	09, 17, 21	SONY	15, 16
LOEWE	02	THOMSON	13, 14, 24
PANASONIC	08, 23 to 27	TOSHIBA	07, 16 to 19, 21

Result: If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control.

➢If several codes are indicated for your television brand, try each one in turn until you find one that works.

☛When you change the batteries in the remote control, you must reprogramme the code, following the same procedure.

You can then control the television using the following buttons.

Button	Function
TV STANDBY/ON ➀ Used to switch the television on and off.
TV or VCR ➁	Used to switch between the TV and VCR modes.
INPUT SEL. ➂	Used to select an external source.
VOL + or – ➃	Used to adjust the volume of the television.
PROG/TRK ➄	Used to select the required programme.
( or )
TV MUTE ➅	Used to mute the volume of the television.

➢The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly.

1

2 2

3

4

4

5

5

6

GB

43