Samsung DVD-CM250H/XEF manual DVD Component Connections for DVD, To Component Input on Your TV

Page 50

DVD Component Connections (for DVD)

DVD Only

SPEAKERS

Component video output is available only for DVD playback. RF and Line input are available for Tuner and VCR playback.

GB

COMPONENT VIDEO OUT

FRONT R

FRONT L

WOOFER

1

SURROUND R SURROUND L CENTER

S-VIDEO OUT

To Component Input on Your TV

Press "OK" to confirm Prorgessive scan mode. Otherwise press "RETURN".

Please set your TV to component input. If your TV doesn't have Progressive scan mode, there will be no signal on the screen.

If your TV set supports Progressive Scan, it can transmit Pr, Pb, and Y signals separately, so you can enjoy sharp and clear picture.

☛What is Progressive Scan?

It is a set of jacks that can provide sharp and clear picture quality by using twice the number of fields of lines than component output.

1Connect the component output of the DVD player to your TV set. Use the component cable to connect the component output on the back panel of the DVD-VCR to the component input of your TV.

◆If you mix up the connections when connecting the component cable, the picture will appear reddish or bluish.

2Set your TV to COMPONENT.

Select component input as your TV's AV input. At this point, even if the picture appears reddish, it is normal.

3Press the P.SCAN button on the front panel.

If the P.SCAN button on the front panel of the DVD-VCR is pressed, a Green LED will light up and the following message will be displayed:

To activate Progressive Scan, press OK.

The following message will be displayed and then the picture will be played in Progressive Scan mode.

4To deactivate Progressive Scan, press the P.SCAN button again. If the P.SCAN button on the front panel of the DVD-VCR is pressed again, a Green LED will light up and Progressive Scan mode will be canceled. Select another mode as your TV's AV input to view another output of the DVD-VCR.

➢This is available only for a TV set that supports Progressive Scan.

•While Progressive Scan is active, video, S-video, and SCART output are not available.

•To activate Progressive Scan, the DVD-VCR must be in Stop mode.

➢You can listen to audio sound through AUX audio output or 5.1CH speakers while watching Component or S-Video output.

50

Image 50

Contents DVD-CM250 GB Contents Playing Back Symbols Safety Instructions Following illustrations represent precautionsPlayback Region Number Disc Type and CharacteristicsDisc Markings 10 11 12 Front View of the DVD-VCRRear View of the DVD-VCR PROG/TRK Infrared Remote ControlShuttle 33 UP 34 OKCopy mode indicator Display IndicatorsAccessories Connector Location Type Deciding How to Connect DVD-VCRYour DVD-VCR is equipped with the following connectors Connecting DVD-VCR to the TV using the Coaxial Cable Connecting DVD-VCR to the TV using the Scart CableAV2 in By means of 21-pin Scart Cable AV1EURO AV By means of 21-pin Scart CableBy means of RF Coaxial Cable Plug & Auto Set up Tuning Your Television for the DVD-VCR DVD Button Deck Control KeysSTANDBY/ON Button VCR ButtonBasic TV Tuner Operations Inserting Batteries in the Remote ControlFind that the remote control is no longer working correctly Insert a blank VHS videotape into the VCR deck Copying from DVD to VCRInsert VHS Tape Copy the DVD to VHS TapeOpen Menu Setting the Date and TimeSetting the Menu Language Select LanguagePresetting the Stations Automatically If you Then Presetting the Stations Manually13 To...Then Press the corresponding Clearing a Preset StationPress the OK or ❿ to select a Manual Setup option Result The TV Station Table menu is displayedPreset TV programme is selected Changing the Preset Station TableSetup option is selected Press the or ❷ buttons, until the TV System option is Selecting the RF OUT Sound Mode B/G-D/KSetting the DVD-VCR Output Channel SelectedSelecting the Colour Mode OK or ❿, untilIntelligent Picture Control Auto Power Off Off 1Hour 2Hour 3HourPress OK or ❿, until Screen MessagesSelecting the Cassette Type E180 E240 300 E260DVD-VCR allows you to playback high quality S-VHS tapes Repeat PlayVHS Play Selecting the Recording Speed VCR Protecting a Recorded Cassette VCR Recording a Programme ImmediatelyIf you wish to cancel the recording before the end, press Recording a Programme with Automatic StopRecording start time Using the Timer Programming FeaturePress ❿ to select the recording start time Press ❿ to select the recording speedOn completion, press Return button Checking a Preset RecordingCancelling a Preset Recording Then press Adjusting Picture Alignment ManuallyPlaying a Cassette Option Description Selecting the Audio Output ModePlaying a Cassette in Slow Motion You can play a cassette in slow motionPlaying a Sequence at Variable Speeds Seq Searching for a Specific SequenceNext Seq. etcIntro Scan Buttons, until the Intro Scan option is selectedUsing the Tape Counter Press InfoVCR Connecting an RCA Audio/Video Input Cable Recoding from Another VCR or Camcorder Audio Dubbing a Pre-recorded Cassette CD, DVDButton Function Using the TV Buttons on the Remote ControlBrand Codes Component Video Jack Choosing a ConnectionConnection to an Television Setting Up the Language Features Using the Disc Menu LanguagePress the ,❷ buttons to select ‘English’ Using the Audio LanguageUsing the Subtitle Language Use the ,❷ buttons to select the desired item Setting Up the Audio Options ❿ button Then press the OK or ❿ buttonAbout the Rating Level Setting Up the Parental ControlAbout the Change Password Video Connections for DVD Setting Up the Display OptionsSends Component Interlace signal from Connect S-Video Out to TVDVD Component Connections for DVD To Component Input on Your TVSpecial Playback Features If you are using a 169 TV For 169 aspect ratio discs Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD For 43 aspect ratio discsFor 169 aspect ratio discs Letter Box If you are using a 43 TVDisplays the content of the DVD title in 43 aspect ratio Pan ScanWhen Playing a DVD During play, press the INFO. button on the remoteChanging the Camera Angle Using the Angle buttonUsing the Subtitle button Selecting the Subtitle LanguageUsing the Zoom DVD Want to zoom in onRepeat Chapter/Title Selecting the Audio LanguageRecalling a Marked Scene DVD Using the Mark Function DVDUsing the Mark Function DVD Clearing a MarkMP3-CD Playback ButtonWMA Play WMA Disc PlaybackDo not try recording copyright protected MP3 files MP3/WMA PlayYour MP3 or WMA files should be ISO 9660 or Joliet format Program Play & Random Play Then press the OK buttonPicture CD Playback Thumbnail screenCD-R Jpeg Discs Setting the Surround Speakers Setting the Delay TimeSetting the Center Speaker Distance of a m Setting ms Distance of B mSurround Speakers About Speaker SetupCenter Speaker Front SpeakersTo Set the Bass/Treble To Set the Speaker BalanceTo Test the Speakers Press the Bass or Treble buttonDolby Pro Logic Sound Mode FunctionSound Mode Listening to the Radio Automatic TuningPress and hold l or ❿❿l to begin automatic tuning Tune in to the desired stationPresetting Stations Output Technical SpecificationsInput Problems and Solutions VCR Problem Action Troubleshooting Guide DVDBefore requesting service troubleshooting Ellas Greece Fourlis Trade A.E.B.E This Appliance is Distributed by