Samsung WF520ABP/XAA manual Cleaning the Debris Filter, Filter cover with your finger

maintaining your washer

CLEANING THE DEBRIS FILTER

We recommend cleaning the debris filter when water does not drain well or the “nd” error message is displayed.

1.Open the filter cover by pressing and pulling the handle

of the filter cover with your finger. Filter cover

2.Holding the drain cap, pull the drain tube that is hooked on the guide hook to the front.Do not pull the drain tube with excessive force.

3.Place a bowl under the washing machine to catch any remaining water. Then, hold the drain tube with one hand, and turn the emergency drain cap counter clockwise with the other hand to separate it from the drain tube.

4.Drain the remaining water completely.

Step 1 Step 2

Drain cap

5.Pull out the debris cap and debris filter assembly.

Debris filter cap

6. Wash any dirt or other material from the debris filter. Make sure the drain pump propeller behind the debris filter is not blocked.

Debris filter	Debris filter
cap

7.When you have finished cleaning the filter, insert the debris

cap and filter assembly back into the washer. Turn the debris filter cap clockwise until the indicator on the debris filter cap is in the 12 o’clock position, pointing to the indicator on the washer.

8.Re-attach the emergency drain cap to the drain tube, and

then hook the tube to the hook guide.

9.Re-install the filter cover the filter cover.

30_ maintaining your washer

WF520AB-02838B-08_EN.indd Sec4:30

2012-05-11 ￿￿ 3:34:05