Recovery rate, May be plugged, Disengage

troubleshooting

PROBLEM	SOLUTION

Fills with the wrong	• Turn both faucets on fully.
temperature water.	• Make sure the temperature selection is correct.
	• Make sure the temperature selection is correct.
	• Make sure the hoses are connected to the correct faucets.
	Flush water lines.
	• Check the water heater. It should be set to deliver a minimum 120°
	F (49° C) hot water at the tap. Also check the water heater capacity
	and recovery rate.
	• Disconnect the hoses and clean the screens. The hose filter screens
	may be plugged.
	• As your Washer is filling, the water temperature may change as
	the automatic temperature control feature checks incoming water
	temperature. This is normal.
	• While your Washer is filling, you may notice just hot and/or just
	cold water going through the dispenser when cold or warm wash
	temperatures are selected. This is a normal function of the automatic
	temperature control feature as your Washer determines the
	temperature of the water.

Door locked or will not	• Press the Start/Pause Button to stop your Washer.
open.	• Your Washer door will remain locked during the heating portion of the

	Sanitize Cycle
	• It may take a few moments for the door lock mechanism to
	disengage.

Does not drain and/or spin.	• Check the fuse or reset the circuit breaker.
	• Straighten the drain hoses. Eliminate kinked hoses. If there is a drain
	restriction, call for service.
	• Close the door and press the Start/Pause Button. For your safety,
	your Washer will not tumble or spin unless the door is closed.
	• Make sure the debris filter is not clogged.

Load is too wet at the end	• Use the High or Extra High spin speed.
of the cycle.	• Use high efficiency detergent to reduce over–sudsing.
	• Use high efficiency detergent to reduce over–sudsing.
	• Load is too small. Very small loads (one or two items) may become
	unbalanced and not spin out completely.

Leaks water.	• Make sure the door is firmly closed.
	• Make sure all hose connections are tight.
	• Make sure the end of the drain hose is correctly inserted and secured
	to the drainage system.
	• Avoid overloading.
	• Use high efficiency detergent to prevent over–sudsing.

Has excessive suds.	• Use high efficiency detergent to prevent over-sudsing.
	• Reduce the detergent amount for soft water, small or lightly soiled
	loads.
	• Non-HE detergent is NOT recommended.

34_ troubleshooting

WF520AB-02838B-08_EN.indd Sec7:34

2012-05-11 3:34:07

WF520ABP/XAA specifications

The Samsung WF520ABP/XAA, WD8754CJF/XTC, and WD8704EJA/XEE represent a noteworthy lineup of washing machines that combine innovative technologies and user-centric designs to elevate the laundry experience. Each model features Samsung's commitment to quality, efficiency, and convenience, making them popular choices among consumers looking for reliability in their home appliances.

The WF520ABP/XAA is distinguished by its front-loading design, offering a sleek and modern appearance that complements any laundry room. Key features include a large capacity drum, allowing users to wash more clothes in a single cycle, which is both time-saving and energy-efficient. Its EcoBubble technology generates bubbles during the wash cycle, which penetrate fabrics more effectively, resulting in cleaner clothes even at low temperatures. This not only conserves energy but also extends the life of garments by reducing wear and tear.

In addition to its cleaning capabilities, the WF520ABP/XAA incorporates a Digital Inverter Motor, which operates quieter than traditional motors while also being more energy-efficient. With a variety of wash programs and options, users can customize their laundry experience to suit specific fabric types and soil levels, ensuring optimal results every time.

Moving on to the WD8754CJF/XTC, this model features a unique combination washer and dryer, making it ideal for spaces where a separate dryer isn’t feasible. This all-in-one unit provides the convenience of washing and drying clothes in one machine, streamlining the laundry process. Its Smart Control feature allows users to operate the machine remotely via a smartphone app, providing notifications and updates on cycle progress.

Another notable feature of the WD8754CJF/XTC is its air wash technology, which sanitizes and deodorizes garments without the need for water, protecting delicate fabrics and reducing the frequency of full washes. This model also boasts a high-efficiency rating, ensuring that users save on utility bills without compromising on performance.

Lastly, the WD8704EJA/XEE is characterized by its innovative design and user-friendly interface. This model offers a variety of wash settings, including quick wash, bubble soak, and active wash, catering to various laundry needs. The Crystal Blue Door adds an aesthetic appeal while enhancing visibility into the washing process.

All three models reflect Samsung's commitment to integrating advanced technologies with user convenience, making laundry less of a chore and more of a streamlined, efficient task. With their advanced features, energy savings, and modern designs, the WF520ABP/XAA, WD8754CJF/XTC, and WD8704EJA/XEE stand out as top contenders in the home appliance market.

troubleshooting

PROBLEM

and recovery rate.

may be plugged.

the automatic temperature control feature checks incoming water

temperature. This is normal.

temperature control feature as your Washer determines the

temperature of the water.

• It may take a few moments for the door lock mechanism to

disengage.

restriction, call for service.

• Make sure the debris filter is not clogged.

to the drainage system.

• Avoid overloading.

• Use high efficiency detergent to prevent over–sudsing.

WF520ABP/XAA specifications