Samsung UA55K5520AKXXV, UA49K6500AKXSK manual Read before setting up a wireless Internet connection

Read before setting up a wireless Internet connection

Precautions for wireless Internet

●● This TV supports the IEEE 802.11a/b/g/n/ac communication protocols. Samsung recommends using

IEEE 802.11n. Video files stored on a device connected to the TV via Home Network may not play back smoothly.

"" IEEE 802.11 ac communication protocol is not available on certain models.

●●	To use wireless Internet, the TV must be connected to a wireless router or modem. If the wireless
	router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.
●●	Select a channel that is not currently in use for the wireless router. If the channel set for the
	wireless router is currently being used by another device, the result is usually interference and/or a
	communications failure.
●●	Most wireless networks have an optional security system. To enable a wireless network's security
	system, you need to create a password using characters and numbers. This password is then needed
	to connect to a security-enabled AP.

Wireless security protocols

●●	The TV only supports the following wireless network security protocols.
	––	Authentication Modes: WEP, WPAPSK, WPA2PSK
	––	Encryption Types: WEP, TKIP, AES
●●	In compliance with the newest Wi-Fi certification specifications, Samsung TVs do not support WEP
	or TKIP security encryption in networks running in the 802.11n mode.
●●	If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network
	using PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically
	configures the SSID and WPA key settings.
●●	The TV cannot connect to non-certified wireless routers.