IS7586, B1197 | Lightolier IS:7586 instruction

READ AND UNDERSTAND ALL TRACK, CONNECTOR, FEED-IN-KITS, AND ACCESSORY

INSTRUCTION SHEETS BEFORE INSTALLING ANY TRACK ITEM.

This fixture is intended for installation in accordance with the National Electrical Code and local or Federal code specifications. To assure full compliance with codes and regulations, check with your local electrical inspector before installation. To prevent electric shock, turn off electricity at fuse box before proceeding.

Retain these instructions for maintenance reference.

INSTRUCTION SHEET NO.

IS:7586

B1197

Page 1 of 2

Installation Instructions for Stem Mounting Kit

for use with Lytespan and ProSpec™ Track Systems Only.

Caution:

•Turn off power at fuse box before installing track.

•Instructions for grounding must be followed. Failure to do so may result in a hazardous condition.

•Use only #12 ga. solid copper wire in connectors to maintain proper track rating.

•Do not supply Advent Track from two separate 120V branch circuits as this could overload the neutral track conductor leading to an electrical safety hazard.

•Observe polarity, white (neutral) wire must be connected to terminal marked "NEUT". Failure to observe Polarity may result in an electrical hazard.

Stem mounting kits (18" or 48" long) may be attached to the track at any point and may be spaced up to 4' apart. They may be used to feed power into the track. The unthreaded end of a stem may be field cut using a hacksaw or a similar cutting device. The Stem Extension Kits (48") is used to lengthen a stem 48". The Stem Extension Kit cannot be field cut.

Instructions show the Stem Mounting Kit being installed on Basic Track, providing power feed to a Live End. The same instructions apply to power feed to an Advent Live End, Basic, Advent, ProSpec In- Line, "L", "T", "X" or Variable Angle connector and ProSpec Feed Track.

For Basic "X" and "T" connectors, the neutral terminal is the lower terminal which lines up with the bead in the track, see Instruction Sheet IS:6165.

A. MOUNTING STEMS TO CEILING

1.Power feed Stem must be stem adjacent to fees in point of track. (Wires cannot pass beneath two stems).

2.Splice Supply Leads, #12 AWG solid TW wire (not included), to branch circuit leads in Outlet Box: white to white, black to black (red to red in Advent). Supply Leads must be long enough to run horizontally along the track to the track feed-in point. Pass Supply Leads through Stem Mounting Plate and connect #12 AWG Ground Wire to Ground Screw on the Stem Mounting Plate.

3.Fasten Stem Mounting Plate to Outlet Box. Mount other Stem Mounting Plate(s) to ceiling in a straight line. Space not more than 4' apart. See Fig. 1.

4.Assemble Track Clamps as shown in Fig. 1. Screw Track Clamps onto Stems and slip Screw Collars and Canopies onto Stems.

5.Pass Supply Leads through Stem used for power feed, insert Stems into Stem Mounting Plates and tighten Set Screws. Thread Screw Collars onto Stem Mounting Plates. See (Fig. 1 and 2).

Outlet Box
Ground Wire	Stem Mounting Plater
	Stem Mounting Plater
Ground Screw
Groung Spring
Canopy
Screw Collar	Set Screws
Screw Collar
	Stem
	Screws
Supply Leads	Track Clamps
Supply Leads
Fig. 1

Center Barrier
Broken Off	Wireway Cover
	Wireway Cover
Live End			Stem
Live End
			Screw
Supply
Leads	Screw		Track Rib
	Screw

Bottom Cover	Track Clamp	Track Unit	Bead
Bottom Cover
Fig. 2

FALL RIVER, MASSACHUSETTS 02720

MONTREAL, QUEBEC, CANADA

IS:7586 specifications

The Lightolier IS:7586 is an innovative and versatile lighting fixture that stands out in both design and functionality. As part of the brand's commitment to quality and performance, this model offers a range of features that cater to a variety of commercial and residential applications.

One of the main characteristics of the Lightolier IS:7586 is its sleek and modern design. The fixture boasts a minimalist aesthetic that integrates seamlessly into various architectural styles. Its clean lines and discreet appearance make it an ideal choice for contemporary spaces, while still providing powerful illumination.

The IS:7586 utilizes advanced LED technology, which ensures energy efficiency and sustainability. The integrated LED system not only reduces energy consumption but also offers a longer lifespan compared to traditional lighting options. This makes the fixture a cost-effective choice for both short-term and long-term lighting solutions.

Another significant feature of the IS:7586 is its versatility in terms of control options. The fixture is compatible with various dimming technologies, allowing users to adjust the brightness according to their preferences or specific requirements. This feature makes it particularly suitable for environments that require varying levels of illumination, such as conference rooms, retail spaces, or residential areas.

The Lightolier IS:7586 also offers a range of color temperature options, providing users with the ability to choose the ideal light quality for their specific application. Whether a warm glow is desired for a cozy living room or a cooler tone for a professional setting, this fixture can accommodate those needs effectively.

In terms of performance, the IS:7586 delivers exceptional light output with minimal glare, thanks to its thoughtfully designed lens and reflector system. This enhances visual comfort for occupants while ensuring that spaces are well-lit and welcoming.

Additionally, the fixture is designed with ease of installation in mind. It features a user-friendly mounting system that allows for quick and straightforward setup, reducing installation time and associated costs.

Overall, the Lightolier IS:7586 is a sophisticated lighting solution that combines aesthetics, efficiency, and flexibility. Its modern design, advanced LED technology, and customizable features make it suitable for a range of applications, allowing users to achieve the perfect lighting ambiance while enjoying the benefits of energy savings and longevity.