Input cables (Sold seperately)

HDMI

HDMI-DVI

Component

Composite(AV)

Coaxial (RF)

VGA

 

 

 

 

 

 

¦Installing the Stand

NPreset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws.

1.Attach your LED TV to the stand.

N Two or more people should carry the TV.

N Make sure to distinguish between the front and back of the stand when attaching it.

N To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left or right sides of the TV.

2.Fasten screws at position 1 and then fasten screws at position 2.

N Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to one side.

Back

Front

2

1

¦Disconnecting the Stand

1.

Remove screws from the back of the TV.

2.

Separate the stand from the TV.

N Two or more people should carry the TV.

3.Cover the bottom hole with the cover.

English - 85

[8500-NA]BN68-02322C-Eng.indb 85

2009-07-28 �� 11:23:57

Page 87
Image 87
Samsung 8500 Installing the Stand, Disconnecting the Stand, Input cables Sold seperately, Component CompositeAV Coaxial RF