Samsung 8500 Connecting a USB Device, To select Media Play USB & Dlna, Exceed 1.5 amperes

Media Play (USB & DLNA)

¦Connecting a USB Device

1. Press the POWER button to turn the TV on.

2. Connect a USB device containing photo, music and/or movie files to the USB 1

(HDD) or USB 2 jack on the side of the TV.

3. When the Application selection screen is displayed, press the ENTEREbutton

to select Media Play (USB & DLNA).

N MTP (Media Transfer Protocol) is not supported.

N The file system supports FAT16, FAT32 and NTFS.

N Certain types of USB Digital camera and audio devices may not be

compatible with this TV.

N Media Play only supports USB Mass Storage Class devices (MSC). MSC

is a Mass Storage Class Bulk-Only Transport device. Examples of MSC

are Thumb drives, Flash Card Readers and USB HDD (USB HUB is not

supported.).

N Please connect directly to the USB port of your TV. If you are using a separate

cable connection, there may be a USB compatibility problem.

N Before connecting your device to the TV, please back up your files to prevent

them from damage or loss of data. SAMSUNG is not responsible for any data

TV Rear Panel

or

USB Drive

SUM

PHOTO

851.86MB/993.02MB Free

file damage or data loss.

N Connect a USB HDD to the dedicated USB 1 (HDD) port. Warning: Do not

exceed 1.5 amperes.

Photo Music Movie Setup

SUM Device eExit

NDo not disconnect the USB device while it is loading.

NMSC supports MP3, JPEG and movie files, while a PTP device supports JPEG files only. N The higher the resolution of the image, the longer it takes to display on the screen.

N The maximum supported JPEG resolution is 15360X8640 pixels.

N For unsupported or corrupted files, the ‘Not Supported File Format’ message is displayed.

N If sort key is set to Basic View, up to 1000 files can be displayed in each folder. The other sort key can display up to 10000 files.

N MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation of content, the distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.

N When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen. N If more than 2 PTP devices are connected, you can only use one at a time.

N If more than one MSC device is connected, some of them may not be recognized. If a device requires high power (more than 500mA or 5V), the USB device may not be supported.

N If an over-power (Fail add new device USB 1/USB 2 Power Overload) warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction.

English - 40

[8500-NA]BN68-02322C-Eng.indb 40

2009-07-28 �� 11:23:30