Samsung 8500 user manual Setting the Network, Network Type, Cable Network Setup-Auto Setup

¦Setting the Network

❑Network Type

Select Cable or Wireless as the method to connect to the network.

N The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.

■Cable

Connect to the network using a cable.

■Wireless

Connect to the network wirelessly.

Setup

Game Mode	: Off
BD Wise	: On
Network Type	: Cable	▶
Network Setup
V-Chip
Caption
Melody	: Medium
Light Effect	: Watching TV
Energy Saving	: Off
PIP

❑Network Setup

■Cable Network Setup (when Network Type is set to Cable) N Please check if the LAN cable is connected.

●Internet Protocol Setup → Auto Setup / Manual Setup

●Network Test: You can test or confirm the network connection status after setting up the network. N When unable to connect to a wired network

If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC).

In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet using an Internet Sharer (Router).

The internet connection may fail due to a firewall problem. In this case, contact your Internet service provider. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact Samsung Electronics at 1-800-SAMSUNG.

Cable Network Setup-Auto Setup

If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.

1.Set Network Type to Cable.

2.Select Cable Network Setup.

3.Set Internet Protocol Setup to Auto Setup. N The Internet Protocol is set automatically.

4.Select Network Test to check the network connectivity.

Cable Network Setup

Internet Protocol Setup	: Auto Setup		▶
Network Test
IP Address	:
Subnet Mask	:
Gateway	:
DNS Server	:
	UMove EEnter	RReturn

Cable Network Setup-Manual

To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP).

1.Set Network Type to Cable.

2.Select Cable Network Setup.

3.Set Internet Protocol Setup to Manual Setup.

4.Set up IP Address, Subnet Mask, Gateway and DNS Server.

Cable Network Setup

Internet Protocol Setup	: Manual Setup					▶
Network Test
IP Address	:
		0	0	0	0
Subnet Mask	:
		0	0	0	0
Gateway	:
		0	0	0	0
DNS Server	:
		0	0	0	0

N Press the number buttons on the remote control when you set the Network manually.

5.Select Network Test to check the network connectivity.

■Wireless Network Setup

N The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.

●Internet Protocol Setup → Auto Setup / Manual Setup

●Network Test: You can test or confirm the network connection status after setting up the network.

UMove EEnter RReturn

English - 34

[8500-NA]BN68-02322C-Eng.indb 34

2009-07-28 �� 11:23:27