Samsung VR10M703PW9/WA manual Accessories, ENGLISH-09

Accessories

or

Remote control

(Optional)

Batteries (AAA type)

(Optional)

User manual

Spare filter (Optional)

Docking station

Power cord

Battery charger

Boundary markers

(Optional)

✻✻Accessories may differ depending on the models.

✻✻Refer to page 15 for the installation of boundary markers. ✻✻Battery Spec

SR10M70**** series : Lithium-ion, 21.6V, 1800mAh, 6cell

SR20M70**** series : Lithium-ion, 21.6V, 3600mAh, 12cell

Installation note

Note

ffInstall the docking station in a place where the floor and wall are level. ffIt is best to install the docking station along the grain of wooden floors.

ffIf the emergency switch is off, the POWERbot will not charge even if it is docked on the docking station.

ffAlways turn on the power of the docking station.

––If power is not supplied to the docking station, the POWERbot cannot find it and cannot automatically recharge.

––If the POWERbot is left detached from the docking station, the battery will drain naturally.

ffIf the POWERbot is in sleep mode, power will not come on even if the emergency switch is turned off and then on. Press and hold the [Start/Stop] button on the POWERbot to turn the sleep mode off.

ENGLISH-09

VR7000_EN_DJ68-00763D-09_SA.indd 9 2017-12-19 오후 4:17:32