Samsung RS25FAMS1/ZBD, RS24FLBG1/SKZ, RS24FLMR1/SKZ manual Checking the Parts, Exterior model

Page 27

CHECKING THE WATER DISPENSER LINE (Optional)

1)In order to operate the ice maker properly, water pressure of 1.4 ~ 10 kgf/cm2 is required. In this range a 100 cc paper cup can be filled in 10 seconds.

2)The water filter removes particles. It does not sterilize or destroy any micro-organisms.

3)If the refrigerator is installed in an area with low water pressure (below 1.4kgf/cm2), you should install a booster pump to compensate for the low pressure.

4)Ensure the water storage tank inside the refrigerator is preperly filled initially. Push the water dis penser lever until the water runs from the outlet.

	A universal water supply kit is available at extra cost from your dealer. The refrigerator manufac-
NOTE	turer recommends using a water supply kit containing copper tubing.
NOTE

Checking the Parts

Purifier

(Interior model)

Sealing tape

Clip A x 8EA

Tapping screw x 12EA

Purifier lock

	Water line	station
		station
Purifier		Tightening band
Purifier

(Exterior model)

INSTALLATION INSTRUCTIONS

27

Image 27

Contents Side by Side Refrigerator Represents something you must not do Safety WarningSafety Warning Signs Setting UP the Refrigerator Major FeaturesService center Operating Instructions Control PanelOpitonal Power Freeze Digital PanelBright icon indicates the ice state currently operated If the Ice remains in the Ice bucket, Ice Maker Basic ModelNo Ice Cold WaterShelves and Bins FreezerRefrigerator Food Storage Guide Dairy Compartment Tempered Spill Proof Glass ShelfChilled Bin or CoolSelect ZoneTM Drawer optional Fruit & Vegetable Drawer Upper and LowerCool Select button OptionalSoft Freeze ChillThaw button Quick Cool buttonRemoving the Refrigerator Accessories Removing the Freezer AccessoriesCleaning the Accessories Take the lamp cover out in the direction of the arrows Changing the Interior LightDeodorizer Pull out the screw cap ➀ and remove the screwInterior Light in the Freezer Basic Model Water FilterDoors Interior Light in the Freezer Dispenser ModelSelecting the Location for the Refrigerator Installation of the RefrigeratorChecking the Dimensions of your Entrance Door This has the advantage of reducing power consumptionRemoving the Front Leg Cover Optional Removing the Refrigerator DoorsRemoving the Freezer Door Lift the door straight upPlace doors on a protected surface Removing the Refrigerator Door Lifting the door ➇Direction of the arrow Cover first Connect the wiresReattaching the Refrigerator Doors Reattaching the Freezer DoorHinge cover first Reattaching the Refrigerator DoorInsert the lower hinge ➀ in the bracket Reattach it from the front part of the upperReattaching the Front Leg Cover Optional Reattaching the Water Tube OptionalPlease level the refrigerator first RefrigeratorMaking small adjustments between doors Adjust the Clearance Between the DoorsExterior model Checking the PartsFor Interior Model Installing of the Water Dispenser LineSecure the water line Installing the Water Dispenser LineConnect to the water supply line For Exterior modelAttach the purifier lock stations On the rightConnect the water line to the refrigerator Remove any residual matter inside the water supply line Before reinstalling the water filter, remove the wine shelfTroubleshooting Memo Memo Ambient Room Temperature Limits

Related manuals

Manual 34 pages 50.99 Kb

Manual 32 pages 13.54 Kb