INSTALLING THE WATER DISPENSER LINE
Attach the purifier lock stations. | TWO PURIFIER LOCK | |
| STATION | |
|
|
|
-Hold the purifier lock stations in the appropriate position (under the sink for example) and fix it tightly into place where to screw.
TWO PURIFIER LOCK
STATION
WATER TUBE
Secure the purifier in position.
- Fix the purifier in position, as shown in the figure
PURIFIER
on the right.
TIGHTENING
BAND
Connect the water line to the refrigerator.
WATER LINE
- Remove the compressor cover of the refrigerator.
- Connect the water line to the valve, as shown in the fig- ure.
- When connected, check if there is any leakage. If any, repeat the connection.
- Reattach the compressor cover of the refrigerator.
PURIFIER
LOCK STA-
TIONS
CONNECTION NUT
COMPRESSOR COVER OF REFRIGERATOR
INSTALLATION INSTRUCTIONS
Secure the water line.
-Using clip ”A”, fix the water line to the wallor (the back of refrigerator).
-When the water line is secure, make sure whether the water line is not excessively bent, pinched or squashed.
CLIP A
WATER LINE
31