Samsung AR18KPFNDWKNSG, AR24KPFNDWKNSG Mode, English-19, Additional options available in mode

Page 19

mode

For a comfortable sleep, the air conditioner will operate in 3 stages in order of Fall asleep Sound sleep Wake up stage.. When the air conditioner is operating in Cool/Heat mode;

1. Press the Timer button to select ( )..

-- ( ) indicator will keep blinking and you can set the time..

2. Press the , button to set the time..

-- You can set the time in half hour unit from 30 minutes (0..5 on the display) ~

3 hours and hour unit from 3~12 hours..

 

 

 

-- Time can be set from minimum 30 minutes to maximum 12 hours..

 

-- Default time setting for the

 

mode is 8 hours..

 

 

3. Press the SET button to complete the

mode setting..

 

--

) indicator and the set time of the

mode will be displayed on

the remote controller display..

 

 

 

-- Timer indicator ( ) will be displayed on the indoor unit display..

 

--

mode setting will be cancelled if you don't press the SET button within

10 seconds after setting the time.. Therefore, check for the (

) indicator on the

remote controller display and the Timer indicator ( ) on the indoor unit display..

Cancel

ffPress the Timer button select ( ) press the

or

button

 

set the timer to

press the SET button..

 

 

Remote controller display

Additional options available inmode

You can adjust the set temperature by 1 °C within the range of 16 °C~30 °C.

Fan speed will be adjusted automatically according to themode.

However, If you selectmode while heating operation is on, you can adjust fan speed.

When themode is on.

In Cool mode: Air flow direction will be adjusted automatically.

In Heat mode: Adjusting air flow direction is available.

Temperature and fan speed change inmode

•• Fall asleep: Eases you into sleep by dropping the temperature..

•• Sound sleep: Relaxes your body and raises your temperature slightly..

•• Wake up: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed..

Recommended set temperature is between 25 °C ~ 27 °C for cooling and 21 ˚C~23 ˚C for heating.

• If the set temperature is too low, you may feel cold during sleep or catch a cold..

Optimal operation hour of mode is 8 hours.. Therefore, if the time is set too short or long, you may not feel as comfortable as you would expect..

If the mode is set over 5 hours, Wake up stage will begin when 1 hour is remaining in the operation time and the air conditioner will stop automatically..

When the On timer and the function is set simultaneously, the air conditioner will only apply the function that was set later..

R03 TIME

English-19

SG_GOOD_A3050_IB&IM_EN_DB68-05200A-03.indd 19

2/2/2016 8:26:04 AM

Image 19
Contents Air Conditioner Features of your new air conditioner Contents English-4 Safety precautions01epPr aration English-5English-6 For UsingEnglish-7 English-8 Do not place objects or devices under the indoor unitEnglish-9 For CleaningOperation ranges Checking before useEnglish-10 Display Checking the name of the partsMain parts For model ARKPFNRemote controller buttons Checking the remote controllerEnglish-12 Inserting the batteries Remote controller displayLow Battery warning Storing the remote controllerBasic function Press the button to set the desired fan speed Press the button to adjust the temperatureEnglish-15 English-16 Adjusting the air flow direction Vertical air flow Horizontal air flowYou can adjust the fan speed in Cool/Fan/Heat mode Setting the On/Off timerSetting the On timer Set the timer to press the SET buttonButton  Setting the Off timerSet the timer to English-18Mode Additional options available in modeEnglish-19 English-20 Step cooling functionUsing the Comfort function Using the Fast functionEnglish-21 English-22 Using the Single User functionPress the Single user button Setting the Beep sound Using the Auto Clean functionEnglish-23 English-24 Cleaning the air conditionerCleaning the indoor unit Cleaning the outdoor unit heat exchangerRemove the air filter from the main body Cleaning the air filterRemoving the Air filter English-25Removing the Air filter English-26English-27 Reassembling the Air filterAir filter English-28 Maintaining the air conditionerAir conditioner TroubleshootingEnglish-29 Heard when refrigerant flow movement changes. It is normal Button or disconnect the power plug/switchCheck the Drains have been cleared Regular Maintenance Error is indicatedEnglish-31 General information07stIn llan atio Indoor unit Choosing the installation locationInstalling the unit Power supply line, fuse or circuit breakerNoise and vibration Where sulfide gas existsOutdoor Unit English-33 Figure Description When installing more than 1 outdoor unitWhen the air outlet is towards the wall English-34English-35 AccessoriesAccessories in the indoor unit case Accessories in the outdoor unit caseTools for test operations Fixing the installation plateOptional accessories Tools required for installation General ToolsOn a Assembling the hanger screwEnglish-37 On a WallEnglish-38 This QR code for detail video of indoor unit installationRemoving the screws Removing the Cover panel Before mounting the indoor unitEnglish-39 Assembling the Cover panel After mounting the indoor unitEnglish-40 Connecting the assembly cableCable specification Connecting the cableEach wire is labeled with the corresponding terminal number Extend the assembly cable if necessaryEnglish-41 Torque English-42Smooth the cut edges Cut off the remaining foam insulationCutting or extending the pipe Evacuating the indoor unitEnglish-43 Correct Inclined English-44Cracked English-45 Drain hose installationCheck for leakage on both side of the drain outlet Change the direction only when it is necessaryChanging direction of the drain hose English-46Drain hole Drain plug Evacuating the connected pipesEnglish-47 Connect a drain hose to the drain plugEnglish-48 Adding RefrigerantEnglish-49 Performing the gas leak testsFixing the outdoor unit in place Outdoor unit installed on the wall by rackEnglish-50 English-51 Smart Install modeOff / Blinking / On English-52English-53 Final check and trial operationAfter tube contraction work is completed, wrap it with How to connect your extended power cablesEnglish-54 Apply heat to the contraction tube to contract itEnglish-55 021-8255 CE Questions or COMMENTS?
Related manuals
Manual 46 pages 2.98 Kb