Samsung AR12KPFNDWKNSG manual Choosing the installation location, Installing the unit, Indoor unit

Page 32

Installing the unit

IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines. Always disassemble the electric lines before the refrigerant tubes.

Upon receipt, inspect the product to verify that it has not been damaged during transport.

If the product appears damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the installer or the authorized technician has collected the material from the retailer.)

After completing the installation, always carry out a functional test and provide the instructions on how to operate the air conditioner to the user.

Do not use the air conditioner in environments with hazardous substances or close to equipment that release free flames to avoid the occurrence of fires, explosions or injuries.

To help prevent injury when accidentally touching the indoor unit fan, install the indoor unit at least 2.5 m above the floor.

The air conditioner should be used only for the applications for which it has been designed : the indoor unit is not suitable to be installed in areas used for laundry.

Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either accessibility from both sides or ability to perform routine maintenance and repairs. The units’components must be accessible and that can be disassembled in conditions of complete safety either for people or things.

For this reason, where it is not observed as indicated into the Installation Manual, the cost necessary to reach and repair the unit (in safety, as required by current regulations in force) with slings, trucks, scaffolding or any other means of elevation won’t be considered in-warranty and charged to end user.

Power supply line, fuse or circuit breaker

Always make sure that the power supply is compliant with current safety standards. Always install the air conditioner in compliance with current local safety standards.

Always verify that a suitable grounding connection is available.

Verify that the voltage and frequency of the power supply comply with the specifications and that the installed power is sufficient to ensure the operation of any other domestic appliance connected to the same electric lines.

Always verify that the cut-off and protection switches are suitably dimensioned.

Verify that the air conditioner is connected to the power supply in accordance with the instructions provided in the wiring diagram included in the manual.

Always verify that electric connections (cable entry, section of leads, protections…) are compliant with the electric specifications and with the instructions provided in the wiring scheme.

Always verify that all connections comply with the standards applicable to the installation of air conditioners.

Choosing the installation location

Indoor unit

For Wi-Fi Air-conditioner installation, select indoor unit location near to wireless router.

In case Wi-Fi signal strength weakened , Smart APP may be disconnected depending on the Wi-Fi signal strength.

Where airflow is not blocked.

Where cool air can be distributed throughout the room.

Install the refrigerant piping length and the height difference of both indoor and outdoor units as indicated in the installation diagram.

Wall that prevents vibration and is strong enough to hold the product weight.

Out of the direct sunlight .

1 m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated).

As far away as possible from the fluorescent and incandescent lights (so that the remote controller can be operated well).

A place where the air filter can be replaced easily.

Don't install directly above electronics equipment as leaking water may cause damage if not serviced. (eg. Computers, TV, etc).

English-32

SG_GOOD_A3050_IB&IM_EN_DB68-05200A-03.indd 32

2/2/2016 8:26:13 AM

Image 32
Contents Air Conditioner Features of your new air conditioner Contents Safety precautions English-4English-5 01epPr arationFor Using English-6English-7 Do not place objects or devices under the indoor unit English-8For Cleaning English-9English-10 Checking before useOperation ranges Checking the name of the parts Main partsFor model ARKPFN DisplayEnglish-12 Checking the remote controllerRemote controller buttons Remote controller display Low Battery warningStoring the remote controller Inserting the batteriesBasic function English-15 Press the button to adjust the temperaturePress the button to set the desired fan speed Adjusting the air flow direction Vertical air flowHorizontal air flow English-16Setting the On/Off timer Setting the On timerSet the timer to press the SET button You can adjust the fan speed in Cool/Fan/Heat modeSetting the Off timer Set the timer toEnglish-18 Button English-19 Additional options available in modeMode Step cooling function English-20English-21 Using the Fast functionUsing the Comfort function Press the Single user button Using the Single User functionEnglish-22 English-23 Using the Auto Clean functionSetting the Beep sound Cleaning the air conditioner Cleaning the indoor unitCleaning the outdoor unit heat exchanger English-24Cleaning the air filter Removing the Air filterEnglish-25 Remove the air filter from the main bodyEnglish-26 Removing the Air filterAir filter Reassembling the Air filterEnglish-27 Maintaining the air conditioner English-28English-29 TroubleshootingAir conditioner Button or disconnect the power plug/switch Check the Drains have been cleared Regular MaintenanceError is indicated Heard when refrigerant flow movement changes. It is normal07stIn llan atio General informationEnglish-31 Choosing the installation location Installing the unitPower supply line, fuse or circuit breaker Indoor unitWhere sulfide gas exists Outdoor UnitEnglish-33 Noise and vibrationWhen installing more than 1 outdoor unit When the air outlet is towards the wallEnglish-34  Figure DescriptionAccessories Accessories in the indoor unit caseAccessories in the outdoor unit case English-35Fixing the installation plate Optional accessoriesTools required for installation General Tools Tools for test operationsAssembling the hanger screw English-37On a Wall On aThis QR code for detail video of indoor unit installation Removing the screwsRemoving the Cover panel Before mounting the indoor unit English-38Assembling the Cover panel After mounting the indoor unit English-39Connecting the assembly cable Cable specificationConnecting the cable English-40English-41 Extend the assembly cable if necessaryEach wire is labeled with the corresponding terminal number English-42 Smooth the cut edgesCut off the remaining foam insulation TorqueEnglish-43 Evacuating the indoor unitCutting or extending the pipe Cracked English-44Correct Inclined Drain hose installation English-45Change the direction only when it is necessary Changing direction of the drain hoseEnglish-46 Check for leakage on both side of the drain outletEvacuating the connected pipes English-47Connect a drain hose to the drain plug Drain hole Drain plugAdding Refrigerant English-48Performing the gas leak tests English-49English-50 Outdoor unit installed on the wall by rackFixing the outdoor unit in place Smart Install mode English-51English-52 Off / Blinking / OnFinal check and trial operation English-53How to connect your extended power cables English-54Apply heat to the contraction tube to contract it After tube contraction work is completed, wrap it withEnglish-55 Questions or COMMENTS? 021-8255 CE
Related manuals
Manual 46 pages 2.98 Kb

AR18KPFNDWKNSG, AR24KPFNDWKNSG, AR12KPFNDWKXSG, AR12HPFSDWK/SG, AR24KPFNDWK/SG specifications

Samsung's AR series air conditioners, including models AR12KPFNDWKNSG, AR24KPFNDWK/SG, AR12HPFSDWK/SG, AR12KPFNDWKXSG, and AR24KPFNDWKNSG, represent a perfect blend of advanced technology, efficiency, and design, making them a vital component of modern home environments.

One of the standout features of these models is Samsung's Digital Inverter technology. This state-of-the-art system optimizes energy consumption by automatically adjusting the compressor speed depending on the cooling demand. As a result, these air conditioners not only provide powerful cooling when it's needed but also operate quietly and maintain energy efficiency, resulting in lower electricity bills.

Another notable characteristic is the Fast Cooling mode, which allows for rapid temperature adjustments. This is particularly advantageous during the sweltering summer months when immediate relief is desired. The AR series can quickly lower temperatures to provide comfort as soon as you enter the room.

These models also come equipped with Samsung's advanced filtration technology, which plays a significant role in maintaining indoor air quality. The air conditioners are designed with a multi-layer filtration system that traps dust, allergens, and other pollutants, creating a cleaner and healthier environment for occupants. This feature is increasingly essential, particularly for those with allergies or respiratory concerns.

The design of the AR series is sleek and modern, ensuring that they fit seamlessly into any interior decor. The front panel is smooth and simple, often available in neutral colors that allow it to blend effortlessly with various room styles. Furthermore, the compact form factor of these units makes them easy to install without compromising valuable floor space.

In terms of control, these air conditioners are user-friendly. They often come with a remote control for convenient operation from anywhere in the room, as well as smart features that enable control via smartphone apps. This compatibility with smart home systems provides added convenience for tech-savvy users.

Moreover, the models are designed with durability in mind. High-quality components and a robust build ensure that these air conditioners are built to last, handling the rigors of everyday use while minimizing maintenance needs.

In summary, the Samsung AR12KPFNDWKNSG, AR24KPFNDWK/SG, AR12HPFSDWK/SG, AR12KPFNDWKXSG, and AR24KPFNDWKNSG models epitomize modern air conditioning technology. With their efficient performance, advanced filtration, user-friendly controls, and stylish design, they cater to contemporary consumer needs while ensuring comfort and satisfaction.