Samsung RT77KBSM1/TAC LEVELing tHE rEfrigErator, Installing and Disassembling the Door Handle

When installing, servicing, or cleaning behind the refrigerator, be sure to CAUTION pull the unit straight out and push back in straight after finishing.

Also, make sure your floor supports the full-load refrigerator. Otherwise, it may cause floor damage.

•Please tie up the extra length of the power

CAUTION cord at the back of the refrigerator so as not to be touched on the floor preventing the power cord from being crushed by the rollers upon relocation.

LEVELing tHE rEfrigErator

If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily.

case 1) The appliance tilts down to the left.

•Turn the left adjusting leg in the direction of the arrow until the appliance is level.

case 2) The appliance tilts down to the right.

•Turn the right adjusting leg in the direction of the arrow until the appliance is level.

PU ING SETT 01

Leg Leg

Screw Driver

<case 1>

Screw Driver

<case 2>

INSTALLING AND DISASSEMBLING THE DOOR HANDLE

Installing the Door Handle

1.Match the Handle Locking Tabs installed on the left hand side of the door and the handle inserts.

2.Fix the handle by pulling it down or tapping it lightly with a tool like a rubber hammer.

3.Check whether the locking tabs inside the handle are assembled by pulling it up and down.

setting up _7

DA99-01697C(0.6).indb 7 2011.5.31 2:24:23 PM