B1204 Page 3, Lamping Fig. H | Lightolier 1004ICVN specs

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE

This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.

Retain these instructions for maintenance reference.

INSTRUCTION SHEET NO.

IS:1004ICV

B1204 Page 3 of 4

8.LAMPING (Fig. H)

1.Make sure that power is OFF when lamping or relamping. Remove LAMP RING from TRIM by pulling straight down.

2.Remove LAMP SHIELD from LAMP RING.

3.Place LAMP SHIELD on back of LAMP (MR-16) and insert both between LAMP SPRINGS until face of lamp sits firmly on GLASS LAMP GUARD (Fig. J).

WARNING: RISK OF FIRE. LAMP SHIELD MUST BE INSTALLED.

4.Attach SOCKET to bi-pin prongs on LAMP.

5.Insert LAMP RING with LAMP SHIELD, LAMP and GLASS LAMP GUARD back into TRIM.

Fig. H

	INSULATING SLEEVING	MALE CONNECTORS
	INSULATING SLEEVING	(ATTACHED TO SOCKET WIRES)
		(ATTACHED TO SOCKET WIRES)
	FEMALE CONNECTORS
	(ATTACHED TO FIXTURE WIRES)	MR16 SOCKET
		MR16 SOCKET
	Fig. J
	LAMP	SOCKET
	LAMP SHIELD	LAMP SPRING
		LAMP SPRING

GLASS LAMP GUARD

LAMP RING

WARNING: 1. LAMP MANUFACTURERS REQUIRE THE GLASS LAMPGUARD BE IN PLACE BEFORE ENERGIZING LAMP, AND THAT GREAT CARE MUST BE TAKEN THAT LAMP IS FULLY COOLED BEFORE RELAMPING. AVOID FINGER MARKS ON INSIDE OF LAMP FOR THEY MAY CAUSE SHORT LAMP LIFE AND POSSIBLE BREAKAGE. 2. USE ONLY REFLECTOR TRIMS PROVIDED BY LIGHTOLIER INC. USE OF OTHER MANUFACTURER'S REFLECTOR TRIMS VOIDS THE UNDERWRITERS LABORATORIES LISTING AND COULD CONSTITUTE A FIRE HAZARD.

NOTE: 1. LOW VOLTAGE FIXTURES should be dimmed only with special dimmers intended specifically for that purpose. Use Lightolier Lytemode, Scenist, Crescendo VA, Neptune VA, Precision VA, Easyset VA, Sunrise VA, Radiant VA or equivalent products by others or variable autotransformers or electronic dimmers intended for use with low voltage fixtures.

2. Low voltage fixtures may produce audible sound which may be objectionable in acousti- cally critical areas.

® LIGHTOLIER a GENLYTE company.

631 Airport Road, Fall River, MA 02720

1004ICVN specifications

Lightolier 1004ICVN is a highly versatile and efficient recessed lighting fixture designed to meet a variety of residential and commercial needs. Known for its compact design and innovative features, this product stands out in the world of illumination solutions.

One of the main features of the Lightolier 1004ICVN is its insulation contact rating. The fixture is designed to be installed in ceilings with direct contact with insulation, allowing for greater flexibility in your lighting layout. This makes it an ideal choice for new construction or remodels where a clean, flush look is desired while maintaining compliance with energy efficiency codes.

The fixture is equipped with a robust, high-efficiency reflector that enhances the quality of light output and minimizes glare. This reflector uses advanced lighting technologies to produce an even light distribution, making it ideal for various settings, from living rooms to commercial spaces. The smooth finish of the reflector also aids in maintaining a contemporary aesthetic, blending seamlessly into modern architectural designs.

Another important characteristic of the Lightolier 1004ICVN is its compatibility with a range of light sources, including LED, incandescent, and compact fluorescent bulbs. This flexibility means that users can choose the best lighting solution that meets their specific requirements for brightness and color temperature. The fixture's design also allows for easy bulb replacement, a feature that enhances its practicality and convenience.

The Lightolier 1004ICVN is designed with user-friendly installation features. It includes adjustable hanger bars that facilitate mounting in various ceiling types and ensure a secure fit. This makes the installation process straightforward, even for those who are not lighting professionals.

Moreover, the fixture supports dimming capabilities, allowing users to create the desired ambiance in any space. This is increasingly important as homeowners and businesses look to enhance their environments through controllable lighting solutions.

In summary, the Lightolier 1004ICVN is a forward-thinking recessed lighting solution that combines a sleek design with versatile functionalities. Its compatibility with various light sources, insulation contact rating, light-enhancing reflector, and ease of installation make it a popular choice for both residential and commercial applications. With the growing emphasis on energy efficiency and customizable lighting experiences, the Lightolier 1004ICVN effectively meets the demands of modern lighting projects.