Rear Panel
● SETUP
| 1 | 2 | 3 |
|
|
|
|
|
|
1. | AUDIO OUT JACKS |
|
| - If |
| - Connect to the Audio input jacks of your television or | progressive scan mode will work. | ||
| audio/video receiver. |
|
| - If |
|
|
|
| interlaced scan mode will work. |
2. | VIDEO OUT JACK |
|
|
|
| - Use a video cable to connect to the Video input jack | 4. DIGITAL AUDIO OUT JACKS | ||
| on your television. |
|
| - Use either a coaxial digital cable to connect to a com- |
|
|
|
| patible Dolby Digital receiver. |
3. | COMPONENT VIDEO OUT JACKS | - Use either a coaxial digital cable to connect to an | ||
| - Use these jacks if you have a TV with Component | A/V Amplifier that contains a Dolby Digital, MPEG2 or | ||
| Video in jacks. These jacks provide PR, PB and Y | DTS decoder. | ||
| video. |
|
|
|
Note
-Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.
-See pages
English _7