Samsung DVD-SH873M/XEU manual Clock SET, Time Zone, Manual clock set, Setup, GMT+0200

CLOCK SET

1.With the unit in Stop mode, press the MENU button.

2.Press the ▲▼ buttons to select Setup, then press the OK or ► button.

3.Press the ▲▼ buttons to select Clock Set, then press the OK or ► button.

HDD & DVD RECORDER			Setup
HDD
Library	System		►
Guide	Clock Set		►
Channel	Language		►
	Audio		►
Timer Record
	Video		►
Disc Manager	Parental Lock	1	►
Setup	Recording		►
m MOVE	sSELECT	rRETURN	eEXIT	●

Time Zone

SYSTEM

To setup, follow steps 1~3.

4.Press the ▲▼ buttons to select Time Zone, then press the OK or ► button.

Select the time zone of your area using the ◄ ► buttons, then select OK using ▲▼ button.

HDD & DVD RECORDER					Clock Set
HDD
Library	Time Zone				►
Guide	Time Zone
	Manual Clock Set				►
Channel	Daylight◄	SavingGMT + 00:00		►	►
Timer Record		OK
Disc Manager
Setup
m MOVE	sSELECT		rRETURN		eEXIT

SETUP

❖GMT (Greenwich Mean Time) Table

Country	GMT	City
United Kingdom, Portugal	GMT+00:00	Dublin, Edinburgh, London, Lisbon, Casablanca
France, Austria, Belgium, Demark, Germany,		Berlin, Stockholm, Rome, Vienna, Paris, Madrid,
Netherlands, Italy, Norway, Spain, Sweden, Switzerland,	GMT+01:00	Prague, Warsaw, Brussels, Copenhagen, Oslo,
Hungary, Czech Republic		Bern, Budapest, Warsaw, Prague

Finland, Turkey, Greece, Eastern Europe

GMT+02:00

Athens, Helsinki, Istanbul, Cairo, Pretoria, Israel

Manual clock set

To setup, follow steps 1~3.

4.Press the ▲▼ buttons to select Manual Clock Set, then press the OK or ► button.

Use the ▲▼◄ ► buttons to input Time, Date or Year. Use number buttons to input clock data directly.

5.Press the OK button, then the date and time will be saved. If you don’t press the OK button, it will not be saved.

HDD & DVD RECORDER			Clock Set
HDD
Library
Guide	mo. da. yr. hr. min. Auto
Channel
	JAN	01 2008 12 00	On
Timer Record
	Tuesday
Disc Manager
Setup
< MOVE	sSELECT	rRETURN	eEXIT

M You must have the RF cable connected to set the Auto Clock. (See page 22)

The DVD Recorder automatically sets the clock according to the time signal broadcast between the channels PR1 to PR5. If there is no clock in the analogue broadcast, the clock will be searched automatically in the DVB-T. If you do not need the Auto clock set function, select Off.

If there is a difference between the time information of analogue and the one of digital, you may not be available to view the contents of DVB-T normally.

English _35