Samsung DVD-SH873M/XEU manual Digital Output, On Nicam mode

system setup

Digital Output

•PCM : Select this when your equipment is not Dolby Digital (or MPEG-2) compatible.

•Bitstream : Outputs Dolby Digital (or MPEG-2) audio as bitstream. Select this when your AV receiver or AV amplifi er has a Dolby Digital (or MPEG-2) Decoder.

HDD & DVD RECORDER			Audio
HDD
Library	Digital Output	PCM:PCM	✔►
Guide	DTS	Bitstream:Off	►
Channel	DRC	: On	►
	NICAM	: On	►
Timer Record
Disc Manager
Setup
m MOVE	sSELECT	rRETURN	eEXIT

M Digital output setting is equally applied to both Dolby Digital and MPEG-2 audio. LPCM sound track is always outputted as PCM. It has no relation with Digital Output setting.

Be sure to select the correct Digital Output or you will hear no sound or a loud noise.

DTS

•Off : Doesn’t output DTS signal. Select this when your AV receiver (or AV amplifi er) does not have DTS decoder.

•On : Outputs DTS Bitstream via digital output when you play DTS track. Select this only when your AV receiver (or AV amplifi er) have DTS decoder.

M When DTS soundtrack is played, sound does not output from AV Audio Output.

DRC

HDD & DVD RECORDER			Audio
HDD
Library	Digital Output	: PCM	►
Guide	DTS	Off:Off	✔►
Channel	DRC	On:On	►
	NICAM	: On	►
Timer Record
Disc Manager
Setup
m MOVE	sSELECT	rRETURN	eEXIT

This is only active when a Dolby Digital signal is detected.

•On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

•Off : You can enjoy the movie with the standard Dynamic Range.

HDD & DVD RECORDER			Audio
HDD
Library	Digital Output	: PCM	►
Guide	DTS	: Off	►
Channel	DRC	Off:On	►
	NICAM	On:On	✔►
Timer Record
Disc Manager
Setup
m MOVE	sSELECT	rRETURN	eEXIT

NICAM

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound by setting NICAM on or off.

•On : NICAM mode

•Off : Only set at this position to record the standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions.

HDD & DVD RECORDER			Audio
HDD
Library	Digital Output	: PCM	►
Guide	DTS	: Off	►
Channel	DRC	: On	►
	NICAM	Off:On	►
Timer Record
		On	✔
Disc Manager
Setup
m MOVE	sSELECT	rRETURN	eEXIT

42_ system setup