■■ 3D Mode: Select the 3D input format.
✎✎ If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 3D Mode from the list below that provides the best 3D viewing experience.
✎✎ When watching 3D images, turn on 3D Active Glasses.
3D Mode | Operation | |
|
|
|
Off | Turns the 3D function off. | |
| 2D → 3D | Changes a 2D image to 3D. |
| Side by Side | Displays two images next to |
| each other. | |
|
| |
| Top & Bottom | Displays one image above |
| another. | |
|
| |
| Line by Line | Displays the images for the left |
| and right eye alternately in rows. | |
|
| |
|
| Displays the images for the |
| Vertical Stripe | left and right eye alternately in |
|
| columns. |
| Checker | Displays the images for the |
| left and right eye alternately in | |
| Board | |
| pixels. | |
|
| |
| Frame | Displays the images for the |
| left and right eye alternately in | |
| Sequential | |
| frames. | |
|
| |
✎✎ “Side by Side” and “Top & Bottom” are available when the resolution is 720p, 1080i and 1080p in DTV, HDMI and USB mode or when set to PC and the PC is connected through an HDMI/DVI cable.
✎✎ “Vertical Strip”, “Line by Line” and “Checker Board” are available when the resolution is set to PC and the PC is connected through an HDMI/ DVI cable.
✎✎ “Frame Sequential” displays the frequency (60Hz only) when the resolution is set to PC.
■■ 3D → 2D (Off / On): Displays the image for the left eye only.
✎✎ This function is deactivated when 3D Mode set to “2D → 3D” or Off.
■■ 3D View Point: The overall adjustment of 3D perspective.
✎✎ This function is deactivated when 3D Mode set to “2D → 3D” or Off.
■■ Depth: Adjusts focus / depth in “2D → 3D” mode.
✎✎ This function is only activated when the 3D Mode is “2D → 3D”.
■■ Picture Correction: Adjusts the images for the left and right eye.
■■ 3D Auto View (Off / On): If 3D Auto View is set to On, a “Side by Side” format HDMI signal with one of the resolutions below is automatically switched to 3D. Here, correct 3D information must be sent from the Standard HDMI 3D Format.
✎✎ If a 3D failure occurs due to a 3D information error, set 3D Auto View to Off and manually select a
3D Mode using the 3D button or corresponding menu.
✎✎ Support resolution (16:9 only)
Resolution | Frequency (Hz) | ||
1280 x 720p | 50 | / 60 | Hz |
1920 x 1080i | 50 | / 60 | Hz |
1920 x 1080p | 24 / 30 | / 50 | / 60 Hz |
■■ 3D Optimisation: The overall adjustment of 3D effect.
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x 1080 input.
An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode.
How to watch the 3D image
3D
To watch in 3D, wear 3D glasses and press the power button on the glasses.
Viewing 3D TV motion pictures for long periods may cause eye fatigue and/or dizziness.
OK Cancel
LMove E Enter e Exit
3D
Usiing tthe LEFT // RIIGHT keys on tthe rremote control, sellectt tthe iicon suitable fforr tthe piictture on scrreen..
LMove EEnter eExit
