CONNECTIONS
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV and other components.
Before Connecting the DVD Player
-Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
-Refer to the user’s manual of the additional components you are connecting for more information on those particular components.
Connection to a TV (For Video)
English
1
Using component video cables (not included), connect the VIDEO OUT on the rear of the DVD player to the VIDEO IN terminal of TV.
2
Turn on the DVD player and TV.
WHITE
RED
YELLOW |
Video Cable
Audio Cable
RED WHITE YELLOW
3
Press the TV/VIDEO button on the TV's remote control to select Video.
Note
-Noise may be generated if the audio cable is too close to the power cable.
-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 12 to 13)
-The number and position of terminals can vary depending on your TV set. Please refer to the user's man- ual of the TV.
-If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence:
9