Samsung DVD-P181K/UMG manual Connection to a TV Progressive, To see the progressive video output

Connection to a TV (Progressive)

1

Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD play- er and TV.

3

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV

WHITE

RED

Audio Cable

BLUE GREEN

RED

Component cable (not included)

English

screen.

4

Set the Video Output to Component (P-SCAN)in the Display Setup menu. (See pages 24 to 25)

To see the progressive video output,

RED WHITE RED BLUE GREEN

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive You need a TV set suppo ting the progressive scan

Scan is		follow the TV User’s Manual regarding Progressive Scan settings in the TV’s
input	function.supported,And you have to set up the TV

menu system.

- Depending on your TV, the connection method may differ from the illustration above.

Note

-What is "Progressive Scan"?

Progressive scan has twice as many scanning lines as the interlace output method has. Progressive scanning method can provide better and clearer picture quality.

11