CO N N E C T I O N S
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an optical cable (not included), connect the | DIGITAL |
AUDIO OUT (OPTICAL) terminal on the rear of the DVD player | |
to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier. | |
If using a coaxial cable (not included), connect the | DIGITAL |
AUDIO OUT (COAXIAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2
Using the video signal cable(s), connect theVIDEO,
to the VIDEO,
3
Turn on the DVD player, TV, and Amplifier.
Optical Cable (not included)
or
Coaxial Cable (not included)
Dolby digital or
DTS amp
4
Press the input select button of the Amplifier to select | external |
input in order to hear sound from the DVD player. |
|
Refer to your Amplifier's user manual to set the Amplifier's |
|
audio input. |
|
Note
-When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.
-Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51)
-The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.