![](/images/new-backgrounds/1226776/226776145x1.webp)
CO N N E C T I O N S
Connection to a TV (Interlace)
-Connecting to your TV using Component video cables.
-You will enjoy high quality and accurate color reproduction images. Component video separates
the picture element into black and white(Y), blue(P | B ), red(P R ) signals to present clear and clean |
images. (Audio signals are delivered through the audio output.) |
|
Connections
1
Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
Using the audio cables, connect the | AUDIO (red and white) | |
OUT terminals on the rear of the DVD player to the | AUDIO (red | |
and white) IN terminals of your TV. |
|
|
Turn on the DVD player and TV. |
|
|
3
Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.
4
Set the Video Output to Component
|
|
| RED | BLUE | GREEN |
|
| RED |
| WHITE |
|
|
| Audio Cable |
|
|
|
|
|
|
|
| Component cable |
|
| RED | BLUE | GREEN | (not included) |
RED | WHITE |
|
Note
-If Video output is incorrectly set to
-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)
- The component terminal of your TV may be marked | R , PB , Y” |
depending on the manufacturer. The number and position of terminals may vary depending on the TV set. |
|
Please refer to the user's manual of your TV. |
|