Samsung HT-J5150K/UM, HT-J5100K/UM Initial Settings Procedure, Home Screen at a Glance, Function

Settings

The Initial Settings Procedure

~The Home menu will not appear if you do not configure the initial settings.

~The OSD (On Screen Display) may change in this product after you upgrade the software version.

~The access steps may differ depending on the menu you selected.

1.Turn on your TV after connecting the product, and then turn on the product. When you turn on the product for the first time, the product automatically displays the Setup Language screen.

2.Press the ▲▼ buttons to select the desired language, and then press the E button.

3.The TV Aspect Ratio screen appears. Press the ▲▼ buttons to select a TV aspect ratio, and then press the E button.

You have four choices:

16:9 Original - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and 4:3 pictures (the old, standard format) in 4:3 pillar box format with black bars on the left and right.

16:9 Full - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and expands 4:3 pictures to fill the 16:9 screen. 4:3 Letter Box - For older, standard screen, analogue TVs. Displays 4:3 pictures in full screen and 16:9 pictures in letter box format that retains the 16:9 aspect ratio but puts black bars above and below the picture.

4:3 Pan-Scan - For older, standard screen, analogue TVs. Displays 4:3 pictures in full screen and 16:9 pictures in Pan-Scan format that fills the screen, but cuts off the left and right sides of the picture and enlarges the middle vertically.

4.The "Initial settings completed." screen appears, and then the Home screen appears.

✎If you want to display the Setup screen again and make changes, select the Reset option. (See page 15)

✎If you use an HDMI cable to connect the product to an Anynet+ (HDMI-CEC)-compliant Samsung TV and 1.) You have set the Anynet+ (HDMI-CEC) feature to On in both the TV and the product and 2.) You have set the TV to a language supported by the product, the product will select that language as the preferred language automatically.

The Home Screen at a Glance

1 2

PLAY DISC PHOTOS VIDEOS MUSIC

No Disc

Change Function Settings

Device

3 4 5

1PLAY DISC

The disc currently in the tray is displayed. Press E to start playing the disc.

2PHOTOS/VIDEOS/MUSIC

Play photos, videos, or music content from a Disc or a USB device.

3Change Device

Displays a list of external devices connected to the main unit. Switch to the desired device.

4Function

Use for switching to an external device or to the radio. You can use the remote control’s

FUNCTION button and the main unit’s button for mode switching.

12 - English