UltraViolet Devices Air Disinfection manual Troubleshooting, Technical Specifications

Page 9

TROUBLESHOOTING

!CAUTION: Always disconnect power to the fixture, before performing any service.

Use personal protection equipment, such as gloves; long sleeves with no gaps between cuffs and gloves, and ultraviolet resistant face shield, if troubleshooting Hygeaire ®.

IMPORTANT: This fixture is to be serviced ONLY by qualified, and appropriately licensed, personnel.

Table 1 - Troubleshooting

Problem

Possible Cause

Corrective Action

Fixture not operating.

No electrical power…

Verify that the purifier is connected to a live power source.

 

 

Power connections, to fixture,

Verify power connections to fixture are fully engaged.

 

 

loose or disconnected…

 

 

 

 

 

Lamp(s) not installed…

Install lamp(s).

 

 

 

 

Germicidal lamp not

Confirm connection of lamp and lamp holder, make sure

 

properly seated…

connection is tight and lamp holder is making full contact

 

 

with lamp.

 

 

 

Germicidal lamp

Germicidal lamp faulty…

Swap suspect lamp, with lamp known to be good. If

 

suspect lamp does not operate, replace lamp.

not operating.

 

 

 

 

Ballast not functioning…

Locate ballast and replace.

 

 

 

 

Interlock Switch open…

Confirm louver panel is closed and secured.

 

 

 

 

Interlock Switch faulty…

Replace Interlock Switch.

TECHNICAL SPECIFICATIONS

Table 2 Technical Specifications

MODEL

 

LIND 24-EVO

LIND 24-EVO-2PM

 

 

Length:

24"

24"

 

 

 

 

 

 

 

 

 

Dimensions:

 

Width:

41/2"

9"

 

 

 

Height:

7-7/8"

7-7/8"

 

 

Volts:c

120v

220-240v

120v

 

220-240v

 

 

 

 

 

 

 

 

Electrical:

 

Amps (Max):

.42A

.23A

.83A

 

.45A

 

 

 

 

 

 

 

 

 

 

Frequency:

50/60Hz

50/60Hz

50/60Hz

 

50/60Hz

 

 

 

 

 

 

 

Total Ultraviolet Output:c

 

8.5 Watts

17 Watts

 

 

 

 

 

 

 

 

cUltraviolet output at 254 nm at 100 hours and 80° F (approximate).

d120v 50/60Hz and 220-240v 50/60Hz units are standard - specify when ordering. Consult factory with other specific power requirements.

9

Image 9
Contents Ultraviolet.com Table of Contents Safety Warnings Product Application Safety InstructionsConstruction LimitationsInstallation IinspectionLocation Lind 24-EVO Installation Installation of Lind 24-EVOInstallation of Lind 24-EVO-2PM PrecautionsRecommended Options Ultraviolet Output Adjustment MaintenanceCleaning Germicidal Lamps Disposal of Mercury Added LampsTechnical Specifications TroubleshootingLind 24-EVO Replacement PartsLind 24-EVO-2PM Replacement parts Model Lind 24-EVO-2PMPatent Notice User Assistance

Air Disinfection specifications

UltraViolet Devices (UVDI) specializes in advanced air disinfection technologies that harness the power of ultraviolet (UV) light to enhance indoor air quality and promote safer environments. With increasing concerns over airborne pathogens and pollutants, UVDI offers innovative solutions that cater to various settings, including hospitals, schools, and commercial facilities.

One of the main features of UVDI's air disinfection systems is their use of UV-C light, a segment of the ultraviolet spectrum known for its germicidal properties. UV-C light efficiently inactivates a broad range of microorganisms, including bacteria, viruses, and mold spores. This technology provides an effective layer of defense against the spread of airborne illnesses, making it pivotal in healthcare settings where infection control is paramount.

UVDI employs cutting-edge technologies in its air disinfection products. For instance, the UVDI-360® Disinfection System utilizes a combination of UV-C light and advanced airflow engineering to ensure maximum exposure of air contaminants to the disinfecting light. This design allows for optimal air circulation, resulting in thorough disinfection of the air within a room or building. Additionally, UVDI’s products are engineered to be compatible with existing HVAC systems, making implementation seamless and efficient.

Another significant characteristic of UVDI’s air disinfection systems is their ongoing efficacy and low maintenance requirements. The company uses high-intensity UV-C lamps that have a long operational lifespan, ensuring consistent performance over time. Moreover, UVDI provides monitoring solutions that allow users to track system performance and ensure that air disinfection is being maintained at the required levels.

UVDI also emphasizes safety in its designs. The UV-C technology used is focused on air but does not pose risks to human health when used correctly in controlled environments. The systems are designed with user-friendly interfaces, making it easy for facility managers to operate and maintain them.

In conclusion, UltraViolet Devices is a leader in air disinfection solutions, combining powerful UV-C technology with innovative engineering to create effective and reliable systems for improving indoor air quality. With a strong focus on health and safety, UVDI continues to play a vital role in the fight against airborne pathogens, ensuring cleaner and safer environments for everyone.