Ducting to Outside Environment | Tripp Lite SRXCOOL33K, SRCOOL33K

6.Mechanical Connections

6.2Ducting to Outside Environment

If required, the SRCOOL33K/SRXCOOL33K can be ducted to the outside environment. Additional hardware for this application must be user supplied; it is not included with the unit. The following requirements apply:

•Additional 250 mm (10-in.) diameter tubes may be needed

•Booster fans may be required depending upon the length of the additional tubing installed

•All four tubes must be routed to the ambient environment

•The tubes must be similar in length, with no sharp bends that could impede airflow

•All tubes must be insulated to prevent condensation on their outer surfaces

•Screens or nets must be provided to prevent insects or other solid objects from entering the tubes

•Covers must be provided to prevent rain and snow from entering the tubes

•Air temperature must be maintained between 0-40°C (32-104°F)

Caution: Unconditioned air imposes extreme load variation on the cooling equipment from summer to winter, resulting in higher system operating costs. Equipment performance should be monitored to ensure that the venting installation is working properly. The unit’s cooling capacity will be reduced during periods of very hot weather.

6.3 Removing Compressor Bracket

The SRCOOL33K/SRXCOOL33K ships with a bracket to stabilize the compressor during transit. This bracket must be removed prior to operating the unit.

1 Open rear door and locate the compressor bracket A .

2 Remove both screws and lift bracket out of the unit.

Caution: Do not loosen or remove the bolts attaching the compressor to the bottom of the unit.

Warning! Failure to remove the compressor bracket voids the product warranty!

1-2

6.4 Installation in High-Humidity Environments

The SRCOOL33K/SRXCOOL33K comes with a built-in condensate removal system that evaporates condensate removed from the air by atomizing it into the condenser air stream. During normal operation, the amount of water removed from the air is minimal; however, if the amount of water removed from the air exceeds the capability of the internal removal system (0.85 gal/hr; 3.22 L/hr), the user must re-route the drainage to a nearby drain using the provided auxiliary drain line.

Please use following procedure when re-routing the drain line.

1Make sure that the unit is powered down and disconnected from AC input.

2Open side panel and locate the condensate pump A , main drain line B , auxiliary drain line C and drain line routing openings D

3Remove the main drain line B from the condensate pump valve. Install the auxiliary drain line C .

4The auxiliary drain line is pre-routed through the unit. Route the unattached end of the auxiliary drain line to a nearby drain or other water removal method.

Note: If a nearby drain is not available, the user must make other water removal arrangements or relocate the SRCOOL33K/ SRXCOOL33K. Auxiliary drain line is 6 ft. in length. For drainage at a longer distance, user must supply longer compatible drain line. Maximum drain length is 33 ft. with a 10 ft. height.

Caution: Before moving the unit, remove any excess water from the bottom pan. Failure to remove excess water could result in damage to the unit and surrounding hardware.

TO DRAIN E

1-4

SRCOOL33K, SRXCOOL33K specifications

The Tripp Lite SRXCOOL33K is a premier portable air conditioning unit designed specifically for cooling server rooms, data centers, and other critical environments where temperature control is paramount. With its effective cooling capabilities and user-friendly design, this unit is an essential tool for IT professionals seeking reliable temperature management solutions.

One of the primary features of the SRXCOOL33K is its impressive cooling capacity. With a powerful output of 33,000 BTUs, it can efficiently cool spaces up to 1,000 square feet, making it ideal for larger rooms or areas with a high concentration of heat-generating equipment. This capacity is particularly critical in maintaining optimal operating conditions for servers and networking equipment, which can be adversely affected by elevated temperatures.

In addition to its cooling prowess, the SRXCOOL33K incorporates advanced technologies that enhance its performance. The unit utilizes a high-efficiency rotary compressor, which not only improves cooling efficiency but also reduces energy consumption. This energy-efficient design can lead to significant cost savings on utility bills, making it a smart investment for any organization.

The SRXCOOL33K also features a host of user-friendly characteristics, making it straightforward to operate and maintain. The digital control panel allows users to set and monitor temperatures with precision, while the included remote control adds convenience for adjusting settings from a distance. Furthermore, the unit is equipped with a programmable timer, enabling scheduled operation to match peak cooling needs.

Portability is another standout feature of the SRXCOOL33K. With easy-rolling casters and side handles, it can be effortlessly moved to different locations as required. This flexibility is particularly advantageous for organizations that may need to reposition their cooling solutions in response to varying equipment loads or spatial configurations.

The air conditioner also includes a built-in condensate pump that automatically removes water collected during operation, eliminating the need for manual drainage. This adds to its low-maintenance nature, allowing IT staff to focus on their core tasks without the hassle of frequent upkeep.

In conclusion, the Tripp Lite SRXCOOL33K stands out as a robust and versatile cooling solution for professionals in the IT and data management sectors. With its exceptional cooling capacity, energy-efficient technologies, and portability, it effectively supports maintaining the ideal conditions for critical equipment.