AST18WJWB IB_E_20219 11/8/04 6:14 PM Page 12
Selecting the Fan Mode
You can select the Fan mode if you want to ventilate your room.
It helps to refresh the air in your room. You can adjust the fan speed in this mode.
1 If necessary, press the 
button.
Result: ◆ The operation indicator on the indoor unit lights up. ◆ The air conditioner starts up in Cool mode with
Turbo fan speed.
◆ The indoor unit beeps.
2 Press the 
button on the remote control until 
is displayed.
Result: ◆ The indoor unit beeps each time you press the | button. |
◆ The air conditioner runs in the Fan mode. |
|
◆ The temperature is set automatically. |
|
Note You can change modes at any time.
3 Press the 
button to select the fan speed until the required setting is displayed.
Low
Medium
High
Result: Each time you press the 
button, the indoor unit beeps.
4 To control the airflow direction, refer to page 15.