Replacing the Replacement Filter
The Replacement Filter eliminate finer particles of dust, molds and mites in the air in your room that are as small as 0.3 microns.
1Open the Filter Box and pull out the Replacement Filter Section towards the direction of the arrow.
2Detach the HEPA Filter from the Replacement Filter Section.
3Replace the old HEPA Filter with new one, and place it back into the Replacement Filter Section.
4After pushing the Replacement Filter Section back into the place, close the Filter Box.
5 Press the control panel’s | button for 2 seconds. |
Result: ◆ The Replace Indicator on the control panel turns off. It will light up again when the time for the next filter replacement comes.
◆The air cleaner beeps.
IMPORTANT Even though the Replace Indicator does not light up,
always press the 
button for 2 seconds after replacing the Replacement Filter.
Note | ◆ | You only need to replace the Replacement Filter once in five years or |
|
| when the Replace Indicator lights up. However, the replacing |
|
| frequency of the Replacement Filter may vary according to the time |
|
| and place that the air cleaner is operated. |
| ◆ | You can purchase new HEPA Filters in an authorized service center. |
Replacement
Filter Section
HEPA Filter