
troubleshooting and information codes
CHECK THESE POINTS IF YOUR WASHING MACHINE...
| PROBLEM | SOLUTION | 
| 
 | 
 | 
| Will not start.. | • Make sure the door is fi rmly closed. | 
| 
 | • Make sure your Washer is plugged in. | 
| 
 | • Make sure the water source faucets are open. | 
| 
 | • Make sure to press the Start/Pause Button to start your Washer. | 
| 
 | • Make sure the Child Lock is not activated; see page 25. | 
| 
 | • Before your Washer starts to fi ll, it will make a series of clicking noises | 
| 
 | to check the door lock and do a quick drain. | 
| 
 | • Check the fuse or reset the circuit breaker | 
| 
 | 
 | 
| Has no water or not enough | • Turn both faucets on fully. | 
| water.. | • Make sure the door is tightly closed. | 
| 
 | • Straighten the water inlet hoses. | 
| 
 | • Disconnect hoses and clean screens. Hose fi lter screens may be clogged. | 
| 
 | • Open and close the door, then press the Start/Pause Button. | 
| 
 | 
 | 
| Has detergent remains in the | • Make sure your Washer is running with sufficient water pressure. | 
| automatic dispenser after the | • Make sure the Detergent Selector dial is in the upper position when | 
| wash cycle is complete. | using granular detergent. | 
| 
 | 
 | 
| Vibrates or is too noisy. | • Make sure your Washer is set on a level surface. If the surface is not | 
| 
 | level, adjust your Washer feet to level the appliance. | 
| 
 | • Make sure that the shipping bolts are removed. | 
| 
 | • Make sure your Washer is not touching any other object. | 
| 
 | • Make sure the laundry load is balanced. | 
| 
 | 
 | 
| Stops | • Plug the power cord into a live electrical outlet. | 
| 
 | • Check the fuse or reset the circuit breaker. | 
| 
 | • Close the door and press the Start/Pause Button to start your Washer. | 
| 
 | For your safety, your Washer will not tumble or spin unless the door is closed. | 
| 
 | • Before your Washer starts to fi ll, it will make a series of clicking noises to check | 
| 
 | the door lock and do a quick drain. | 
| 
 | • There may be a pause or soak period in the cycle. Wait briefl y and it may start. | 
| 
 | • Check the screens on the inlet hoses at the faucets for obstructions. | 
| 
 | Clean the screens periodically. | 
| 
 | 
 | 
English - 38