Samsung AS24DWANXSG, AQ18DWAUMG, AS24DWANMID Using advanced functions, Using the Turbo Function

Page 19

using advanced functions

USING THE TURBO FUNCTION

Turbo function will be helpful to cool or heat your room quickly and effectively by operating at the maximum fan speed for 30 minutes.

1.Turn on the air conditioner.

Press the Power button on the remote control.

2.Set the operating mode.

Press the Turbo button on the remote control until Turbo indicator appears on the remote control display.

The air conditioner operates in Turbo fan speed and automatically adjusts the temperature according to the current room temperature. The unit operates for 30 minutes and then operates in the last mode used, or in Auto mode if Dry/Fan mode is the most recent mode used.

Turbo function is only available in Auto/Cool/Heat mode. If Turbo function is selected in Dry/Fan mode, operating mode changes to Auto.

To deactivate Turbo function

1.Press the Turbo button on the remote control again.

The air conditioner operates in the last mode used, or in Auto mode if Dry/Fan mode is the most recent mode used.

•When using the remote control, make sure the indicator matches your selection on the remote control display.

•Temperature/Fan speed cannot be adjusted while using this function.

•Air flow can be adjusted manually. (See page 19 for instructions.)

•When the Turbo function is activated, pressing Mode button will automatically cancel the function.

20_ using advanced functions

Montblanc2_UMG_29051A_IB_E.indd 20

2008-1-22 13:34:03

Image 19

Contents Only a series model Cool Summer OfferCost Efficient System Look for EverywhereSafety Information Safety informationSevere Warning Signs Use an exclusive power source for the air conditioner Ensure no water gets into the air conditioner Potential risk of personal injury or burn Make sure there are no obstacles under the indoor unit Contents Using Advanced Functions Indoor unit digital display Viewing your air conditioner before useChecking the Indoor Unit and Digital Display Main partsAir outlet Air intake rear side Power button and Room temperature sensorRemoving the Front Panel Checking the Outdoor UnitChecking the Remote Control Slide cover down to Install two AAA Open Batteries Remote control displayUsing the remote control Installing the batteriesAuto Selecting Operation ModeOperating basic function Turning the AIR Conditioner on and OFFCool Dry Fan Heat For AQA model Vertical air flow Adjusting the AIR Flow DirectionHorizontal air flow Using the Turbo Function Using advanced functionsTo deactivate Turbo function On timer Setting the TimerTo deactivate the On timer Off timer Setting TimerTo deactivate the Off timer On timer is longer than Off timer Combining On timer and Off timerTo deactivate the timer combination On timer is shorter than Off timerMode Cool mode Temperature changes in modeTo deactivate mode Waking up from modeUsing the Function only a Series Model To deactivate the Energy saving function Using the Energy Saving FunctionAutoheat, Heat, Fan mode approximately 15 minutes Using the Evaporator Clean FunctionAir filter Cleaning and maintaining the air conditionerCleaning the Exterior Cleaning the FilterDNA filter Maintaining Your AIR Conditioner Replacing the FilterDeodorizing filter Appendix TroubleshootingOperation Ranges Technical SpecificationsQuestions or COMMENTS? Air Conditioner