Samsung AQ18DWAUMG Using the Energy Saving Function, To deactivate the Energy saving function

Page 26

USING THE ENERGY SAVING FUNCTION

This function will set the temperature range limit to help you save energy while the air conditioner is operating in Cool mode.

1.Press the Energy saving button on the remote

control while the air conditioner is operating in Cool mode.

E.Saver indicator and air swing indicator appear automatically on the remote control display. The air flow blades move up and down.

If the current set temperature is lower than 26˚C, it will automatically raise the set temperature to 26˚C.

Energy saving function is only available in Cool mode.

When the Energy saving function is activated, the temperature range will be limited to 26˚C~30˚C.

If the desired temperature is lower than 26˚C, turn off the energy saving function by pressing the Energy saving button again.

Temperature/Fan speed can also be adjusted. (See step 3~4 on page 15 for instructions.)

Air flow can be adjusted manually. (See page 19 for instructions.)

To deactivate the Energy saving function

1.Press the Energy saving button on the remote control.

The Energy saving function shuts off and the Energy saving indicator will disappear on the remote control display.

Montblanc2_UMG_29051A_IB_E.indd 27

using advanced functions _27

2008-1-22 13:35:14

Image 26
Contents Look for Everywhere Cool Summer OfferCost Efficient System Only a series modelSevere Warning Signs Safety informationSafety Information Use an exclusive power source for the air conditioner Ensure no water gets into the air conditioner Potential risk of personal injury or burn Make sure there are no obstacles under the indoor unit Contents Using Advanced Functions Main parts Viewing your air conditioner before useChecking the Indoor Unit and Digital Display Indoor unit digital displayChecking the Outdoor Unit Power button and Room temperature sensorRemoving the Front Panel Air outlet Air intake rear sideChecking the Remote Control Installing the batteries Remote control displayUsing the remote control Slide cover down to Install two AAA Open BatteriesTurning the AIR Conditioner on and OFF Selecting Operation ModeOperating basic function AutoCool Dry Fan Heat For AQA model Horizontal air flow Adjusting the AIR Flow DirectionVertical air flow To deactivate Turbo function Using advanced functionsUsing the Turbo Function To deactivate the On timer Setting the TimerOn timer To deactivate the Off timer Setting TimerOff timer On timer is shorter than Off timer Combining On timer and Off timerTo deactivate the timer combination On timer is longer than Off timerMode Waking up from mode Temperature changes in modeTo deactivate mode Cool modeUsing the Function only a Series Model Using the Energy Saving Function To deactivate the Energy saving functionUsing the Evaporator Clean Function Autoheat, Heat, Fan mode approximately 15 minutesCleaning the Filter Cleaning and maintaining the air conditionerCleaning the Exterior Air filterDNA filter Deodorizing filter Replacing the FilterMaintaining Your AIR Conditioner Troubleshooting AppendixTechnical Specifications Operation RangesQuestions or COMMENTS? Air Conditioner