Samsung VR20H9050UW/EU manual General

Page 4

Safety information

Important safety instructions

When using an electrical appliance, basic precautions should be observed, including the following:

READ ALL INSTRUCTIONS BEFORE USING YOUR POWERbot.

Unplug from outlet when not in use and before conducting maintenance.

WARNING: to reduce the risk of fire, electric shock, or injury:

GENERAL

Use only as described in this manual.

Do not operate POWERbot or charger (station) if it has been damaged in any way.

If the vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped in water, return it to a customer care center.

Do not handle the charger (station) or POWERbot with wet hands.

Use only on dry, indoor surfaces.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

BATTERY Charger (station)

Do not modify the polarized plug to fit a non-polarized outlet or extension cord.

Do not use outdoors or on wet surfaces.

Unplug the charger (station) from the outlet when not in use and before servicing.

Use only the charger (station) supplied by the manufacturer to recharge.

Do not use with a damaged cord or plug or a loose power outlet.

Do not pull or carry by the cord, use the cord as a handle, close the door on the cord, or pull the cord around sharp edges or corners. Keep the cord away from heated surfaces.

Do not use extension cords or outlets with inadequate current carrying capacity.

Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

Do not mutilate or incinerate batteries as they will explode at high temperatures.

Do not attempt to open the charger (station). Repairs should only be carried out by a qualified customer care center.

Do not expose the charger (station) to high temperatures or allow moisture or humidity of any kind to come into contact with the charger (station).

ENGLISH-04

Image 4
Contents POWERbot Contents 03 Safety information Installation Safety information Safety informationGeneral ENGLISH-05 ENGLISH-06 ENGLISH-07 Installation Power of the charger must be on at all timesInstallation note Charging 3Check the charging statusAutomatic charging Steps to take if recharging is not being executedInstalling the Virtual guard Part name of the Virtual guard Using POWERbot Turning the power on/offSelecting cleaning mode Cleaning method for each modesUsing the remote control Inserting batteriesDirection control Name of each part TopBottom Display panelSetting time/schedule Setting the timeSetting the schedule Cancelling during setupCleaning the dustbin Cleaning and maintainingCleaning the sensors and the camera Cleaning the Power brush Cleaning the Driving wheelCharging Cleaning and maintenanceUse About battery About the IrDA sensorError codes Error codesTroubleshooting Symptom ChecklistOpen Source Announcement Specifications Detail informationCountry Customer Care Center Web Site