Samsung AX40H5000GM/MG manual Check before use, Installation status, Power plug and power outlet

Page 11

Check before use

Installation status

Ensure that the following installation requirements have been satisfied. ffThe product should be installed on an even, level floor.

ffThere should be no objects blocking the air intake and outlet.

ffThe installation site should be dry and there should be no inflammable substances around it. ffThe product should be installed at least 5 cm (15 cm is recommended) from the wall.

ffBefore using the product for the first time and when replacing the integrated HEPA/deodorization filter, make sure to remove the plastic packaging of the filter.

Power plug and power outlet

ffBe sure to use a dedicated 220 - 240 V electrical outlet.

(When the power is applied, the product enters the standby state.) ffUnplug the power plug if it will not be used for a long period of time.

General information about the product

Be sure to install the filters before using the product and replace the filters when they start emitting a strange odor.

ffThis product is highly efficient for deodorizing household odors such as ammonia, as well as formaldehyde (the main cause of sick building syndrome), VOCs etc. However, deodorization function of the air purifier is effective when air is penetrates through the filter. Therefore when there’s excessive odor in your room, ventilate the room first and use the air purifier afterwards to eliminate remaining odors for more effective deodorization.

fIfyou operate the air purifier without the filters, you cannot expect any air purification effect.

fIfthe filters are contaminated, the air purification performance will be degraded. If the filters are seriously dirty or emit a bad odor or the airflow from the product decreases significantly, replace the filters.

Avoid operating the air purification system when cooking food that generates a strong odor such as fish.

ffOtherwise, the lifetime of the deodorization filter may be significantly decreased and the deodorization filter may become contaminated by the odor.

ffWhen the integrated HEPA/deodorization filter, is contaminated by surrounding odors and the odors can be smelt when the air purification filter operates, please replace the filter as it has reached its end of life.

Please close the windows and doors when operating the product.

ffOtherwise, the air purification performance is degraded.

ffThe main noxious gas that cannot be removed: Carbon monoxide (CO)

ffConcentration level of carbon dioxide may increase if you operate the product for a long time with windows closed. Therefore, ventilate the room regularly between use. When filter is saturated with just a weak odor, ventilating the room will help get rid of saturated odor.

10

ACR JUPITER SAUID_IB_05554A-00_EN.indd 10

2015-07-02 오전 10:34:20

Image 11
Contents Questions or COMMENTS? Thank you for purchasing this Samsung product Air PurifierContents Product FeaturesPersonal injury or property damage Safety precautionsFor Installation Warning Personal injury or deathThere should be over 15cm space around the appliance For Installation CautionSupply For Power Supply WarningDo not unplug the appliance during operation When a repair is needed, contact the service centerDo not place heavy objects on the product XXThis may result in electric shock or injuryDo not operate the product with wet hands Do not put the product into waterFor Cleaning General information about the product Installation statusPower plug and power outlet Check before useMounting the back cover of the product Using the filtersSpecifications Removing the back cover of the productMounting sequence of the filters and the back cover Check the name of the componentsAir Purifier Front view Rear viewControl panel buttons Cleanness indicatorButtons on the control panel FfThe air purifier turns on with a ringing sound Virus doctor operation indicator functionAir purification operation Button locks the buttons Sleep modeHold Button for 3 seconds or longer to reset the alarm Button lock functionStoring the product Cleaning and maintenanceCleaning the exterior Cleaning the sensor When the filter is heavily contaminated with Cleaning the Pre filterFfClean the Pre filter at least once every two weeks Holes② Clean the Pre filter under running waterButton for 3 seconds Replacing the integrated HEPA/deodorization filterTurn off the air purifier, remove the back cover Holes②Inserting the filters Problem Checkpoint Solution TroubleshootingProblem Is there dust or some
Related manuals
Manual 24 pages 55.61 Kb