Samsung AX40H5000GM/MG Using the filters, Removing the back cover of the product, Specifications

Page 12

Using the filters

ffBefore you use the product for the first time, remove the plastic packaging from the integrated HEPA/deodorization filter.

fIfyou operate the air purifier without the

filters, you cannot expect any air purification effect.

fIfthe filter replacement indicator (

) blinks, replace the integrated HEPA/deodorization filter.

(The integrated HEPA/deodorization filter removes fine, invisible particles, gas and odor particles from the air. Postponing the filter replacement on the basis of a visual evaluation is not a desirable plan. The filter replacement cycle is the maximum usage period of the filter. The actual replacement cycle may vary depending on the operating environment.)

fIfa strange odor is coming from the product, the airflow from the product becomes weak or the recommended replacement cycle is reached, make sure to replace the integrated HEPA/deodorization filter.

ffCleaning the Pre filter frequently improves the performance of the air purifier and helps keep the indoor air clean.

ffFor the installation order and how to install the filters, refer to the Replacing the filters section in the Cleaning and Maintenance chapter.

ffBefore replacing the filters, make sure to turn off the power.

Removing the back cover of the product

Hold the left and right edges of the back cover, pull it forward slightly

 

() and then lift it up () to separate it.

Dust sensor

Odor sensor

 

Mounting the back cover of the product

ENGLISH

Insert the hooks of the back cover into the grooves at the bottom of the main body () and press the edges of the back cover so that it fits into 8 holes () of the main body.

fIfthe hooks of the back cover is not properly locked into the grooves, back cover can not be assembled properly.

Back cover

Specifications

Model

AX40H5000 series

 

 

Dimensions (Width × Height × Depth)

362 mm x 477 mm x 211 mm

Effective area

41.6 m2 (448 ft2)

❋❋The design and specifications of the product are subject to change without notice for product improvement purposes.

11

ACR JUPITER SAUID_IB_05554A-00_EN.indd 11

2015-07-02 오전 10:34:21

Image 12
Contents Questions or COMMENTS? Air Purifier Thank you for purchasing this Samsung productProduct Features ContentsSafety precautions For Installation WarningPersonal injury or death Personal injury or property damageFor Installation Caution There should be over 15cm space around the applianceFor Power Supply Warning SupplyWhen a repair is needed, contact the service center Do not unplug the appliance during operationXXThis may result in electric shock or injury Do not place heavy objects on the productDo not put the product into water Do not operate the product with wet handsFor Cleaning Installation status Power plug and power outletCheck before use General information about the productUsing the filters SpecificationsRemoving the back cover of the product Mounting the back cover of the productCheck the name of the components Air Purifier Front viewRear view Mounting sequence of the filters and the back coverCleanness indicator Buttons on the control panelControl panel buttons Virus doctor operation indicator function Air purification operationFfThe air purifier turns on with a ringing sound Sleep mode Hold Button for 3 seconds or longer to reset the alarmButton lock function Button locks the buttonsCleaning and maintenance Cleaning the exteriorStoring the product Cleaning the sensor Cleaning the Pre filter FfClean the Pre filter at least once every two weeksHoles② Clean the Pre filter under running water When the filter is heavily contaminated withReplacing the integrated HEPA/deodorization filter Turn off the air purifier, remove the back coverHoles② Button for 3 secondsInserting the filters Troubleshooting Problem Checkpoint SolutionProblem Is there dust or some
Related manuals
Manual 24 pages 55.61 Kb