Your new microwave oven

Installing the microwave oven

Place the oven on a flat level surface 85cm above the floor.

The surface should be strong enough to safety bear the weight of the oven.

1.	When you install your oven, make sure there is	20 cm	10 cm behind
	adequate ventilation for your oven by leaving at least	above	10 cm behind
	adequate ventilation for your oven by leaving at least	above
	10 cm (4 inches) of space behind and, on the sides of
	the oven and 20 cm (8 inches) of space above.
			10 cm of
			the side

2.Remove all packing materials inside the oven. Install the roller ring and turntable.

Check that the turntable rotates freely.

3.This microwave oven has to be positioned so that plug is accessible.

If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

For your personal safety, plug the cable into a 3-pin, 220 Volt, 50/60Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable.

Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

6_ your new microwave oven