Samsung MAXDB630FH/UMG manual Connecting your System to the Power Supply, Direction of the arrow

Page 7

Where to Install Your Mini-Com- pact System

To take full advantage of your new mini-compact system, follow these installation instructions before connecting the unit.

Install the system on a flat, stable surface.

Never place this unit on carpeting.

Never place this unit in an outdoor area.

Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.

Make sure that you have enough room to open the compact disc compartment easily.

Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound.

Direct the loudspeakers towards the listening area.

For optimum performance, make sure that both speakers are placed at an equal distance above the floor.

Connecting your System to the Power Supply

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check the voltage.

1						Check the position of the voltage selector on the rear of the system
2						(OPTIONAL).
2						Plug the main lead into an appropriate socket.
3						Press the Standby/ON button to switch your mini-compact system .

Inserting Remote Control Batteries

GB

1	Remove the battery cover on the
	Remove the battery cover on the
	back of the remote by pressing
	down and sliding the cover in the
	direction of the arrow.
	Insert two 1.5V AAA batteries, paying
2 attention to the correct polarities (+
	and –).
3 Replace the battery cover.

Follow these precautions to avoid leaking or cracking cells:

•Place batteries in the remote control so they match the polari- ty:(+) to (+)and (–)to (–).

•Use the correct type of batteries.Batteries that look similar may differ in voltage.

•Always replace both batteries at the same time.

•Do not expose batteries to heat or flame.

Range of Operation of the Remote Control

The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.

To open the remote control cover, push the top of the cover, then

slide downward.

7

Image 7

Contents MAX-DB630 Class 1 Laser Product Safety WarningsContents Front Panel View Display Window Rear Panel View Remote ControlPlug the main lead into an appropriate socket Connecting your System to the Power SupplyReplace the battery cover Follow these precautions to avoid leaking or cracking cellsExample Select PAL, if TV is for PAL Connecting to an External SourceVideo Output Selection ConnectCenter Speaker Rear Speaker R Connecting the LoudspeakersConnecting the FM Aerial Connecting the AM MW/LW AerialConnecting the SW Aerial optional Connection of the MD recorder optional Connection of the TV monitor optional and VCR optionalDVD/CD Digital Out Jack Setting the Clock To play Playing a DiscSelecting a Disc in the CD changer PlaybackHigh-Speed Playback Using the On-Screen DisplayForward/Reverse Searching Slow Play/Playing Frame by FrameForward/Reverse Searching Con Using Disc Menu/TitleRepeat Playback To Playback the Tracks in the Programmed Order To Program Tracks in a particular order in Stop modeTo Cancel the Programming Program PlaybackSelecting the Subtitle Language When you have entered a wrong number Press the Clear buttonTo Change the Program Selecting the Audio LanguageTo enlarge an image System SetupTo Set up the System Various DVD FunctionsWhen the rating level password has been forgotten System Setup Cont’dSetting up the Language Features To set up the language featureMP3 File Compatibility What is MP3?MP3 Playback Starting PlaybackMP3 Playback Cont’d Operations Using the On-Screen Display Repeating PlaybackAdditional Dolby Surround modes Adjusting Speaker Level BalanceDolby Surround Dolby Surround modes=Df-Ds To set the delay time Speaker Setting MethodsDolby Surround Cont’d =Df-Dc Distance of a ValuemsPress Memory Improving Radio Reception Selecting a Stored StationYou can improve the quality of radio reception by To listen to CD Synchro Record FeatureListening to a Cassette Recording a Compact DiscTape Counter Selecting the Cassette Playback Mode Deck 2 OnlyRecording a Radio Program Copying a Cassette DubbingIf you select Timer FunctionCancelling the Timer Press Timer/Clock untilMute Function Selecting an Equalizer PresetPower Surround Function Equalizer modeMicrophone Function Connecting HeadphonesTem Safety PrecautionsPress Push Eject Check that the tape in the cassette is sufficiently taught Precautions When Using Compact DiscsVideo with CD sound, VHS quali Disc type and characteristicsSignal with more distortion. CD is Recorded as a Digital Signal withSystem does not work Before Contacting the After-Sales ServiceChanged Tape does not start play AM MW Technical SpecificationsThis Appliance is Manufactured by