●Monitor
You are not allowed to connect VGA OUT and
① Composite : Makes the output come out through the “Composite /
➁ VGA : Makes the output come out through the “VGA Out” port.
When changing the output from Composite to VGA or from VGA to Composite, the system reboots automatically.
●Multi-channel change
You can set changes for a split screen.
You can set it to 3, 5, 10, 20, or 30 seconds.
●1 CH Support
1 CH DVR is supported. If 1 CH Support is On, 1 CH is supported. If 1 CH Support is Off, 4 CH is supported.
If 1 CH Support is On, a set reboots and support 1 CH.
Caution
[Video Out]
When setting the Composite Output, VGA output does not come out. When setting the VGA Output, Composite Output does not come out.
If you press the No. 1 button for 5 seconds in the Live Mode with keeping the MODE button pressed, the system will change from VGA to COMPOSITE or from COMPOSITE to VGA and reboot.
[1 CH support]
In the case of 1 CH support, the event monitoring, Spot out channel, Spot out event monitoring cannot be set.
Full D1/Half D1/ CIF is supported for the video size in the 1 CH.
If the Full D1 is set and 1 CH support Off is selected, the video size in the 4 CH set to CIF. In the 1 CH setup, the system value is initialized.
[Video Output]
NTSC VGA output : 720x480 (60Hz), PAL VGA output : 720x576 (50Hz)
[NTSC]
For NTSC, because VGA output is output at 720x480 (60Hz), if you have a PC with a CRT monitor, you will have to adjust the image size, and a PC with an LCD monitor that doesn’t support 720x480 adjusts to image signal to 640x480. During this process, vertical line noise can occur.
[PAL]
For PAL, because VGA output is output at 720x576(50Hz), if you have a PC with a CRT moni- tor you will have to adjust the image size; and a PC with an LCD monitor that doesn’t support 720x576 will not have an image on the top and bottom of the screen. Especially in the case of LCD monitors that don’t support 50Hz, pay careful attention when selecting an LCD monitor because the images won’t come up.