Samsung SHR-2040N, SHR-2040P manual 4Recording Mode, Record Mode, Quality, Rate, Video size

4Recording Mode

Record Mode

●Details for Record Mode Menu are as follows.

NTSC PAL

If you press the front “REC” button, the mode value to be recorded will be set.

☛For the setup of Event Recording Mode value, refer to 5-20. Event Recording Mode Setup Menu.

●Mode

On : The current channel is recorded if the REC button is pressed.

Off : The current channel is not recorded even thought the REC button is pressed. The default value is set to “On”.

●Quality

It sets the Quality.

Set to the one among Very high/High/Normal/Low.

●Rate

It sets the Rate means the number of screen recorded every second.

If it is set to 15 ips(NTSC)/12.5 ips(PAL), the system records too many screens per second and the playback continues intermittently since recording is more detailed.

This is appropriate for concentrated monitoring zone setup.

IIn case of NTSC, select one out of 30 ips / 15 ips / 10 ips / 7.5 ips / 5 ips / 3 ips / 1 ips. In case of PAL, select one out of 25 ips / 12.5 ips / 8.33 ips / 6.25 ips / 5 ips / 2.5 ips / 1 ips. The Recording Menu will be activated depending on Video On/Off in the Camera Setup (Menu5-12). When less than 2 cameras are activated at HALF D1, the frame rate of recording may start from 30IPS and when more than 3 cameras are activated at Half D1, the frame rate of recording may start from 15ips(NTSC) / 12.5ips(PAL). CIF supports from 30ips(NTSC) / 25ips(PAL) regardless of the number of activated camera.

●Video size

The Video size is displayed at the bottom of left.

●When changing to a 1-channel DVR, it only supports 30 ips in the Full D1 resolution.

English 5-18