Note
-
-The PORT number is flexible and 4 consecutive numbers are grouped for the change ( 554,555,556,557 ➝ 558,559,560,561 )
-If you use the IP Router for network composition, you should allocate a protocol for
Viewer Setup
-Click the [Viewer Setup] for Viewer Setup.
-Viewer Setup sets the various kinds of item related to the operation of Smart Viewer.
-Viewer setup is composed of Video Recording, File Converting, Sequence Time, OSD Display, Auto Connection, Callback Connection, and Language.
1 |
|
2 |
|
3 | 4 |
5 | 6 |
!Item to set the information necessary for saving the video data displayed into *.dvr file when connecting with
@Item to set the information necessary for converting the file saved in your PC with *.dvr file into JPEG.
#Item to set the information necessary for the auto sequence mode.
$Item to set the information of Smart Viewer OSD.
%Item to set whether Smart Viewer shall be automatically connected to
^Item to set a port for the callback connection.