Data BACK-UP | Samsung SSC-1000/P, SSC-1000/N instruction

User’s Guide

hDATA BACK-UP

In case changing the camera by downloading the set-up data of the Samsung Dome Camera, this is a function for applying the set-up value set up in the changed camera just the way it is. In order to perform this mode, move CURSOR(R) to the DATA BACK-UP in the CAMERA SET MENU, and press the ENTER button. If you want to go back to the main menu, press the MENU button.

M ON= [ 0 0 ] CAM=[ 000 ]

→CAM RESET

DOWN LOAD

UP LOAD

∗If multiple units are connected, data backup can be made only with the controller of which address number is set to “1”(MASTER).

h-1 In order to initialize the camera connected to the controller,

move CURSOR(R) to CAM RESET, and press the ENTER button.

h-2 When downloading the set-up data of the camera, move CURSOR(R) to DOWNLOAD, and press the ENTER button.

h-3 When you wan to set the set-up data downloaded to the camera,

move CURSOR(R) to UPLOAD, and press the ENTER button.

M ON= [ 0 0 ] CAM=[ 000 ]

∗ CAM RESET ∗

M ON = [ 0 0 ] CAM=[ 0 0 0 ]

DOWN LOADING • • •

ADDR :

M ON= [ 0 0 ] CAM=[ 000 ]

UP LOADING • • •

ADDR :

∗If communication error occurs, ‘ERR’ message appears on the second right line of the LCD for a moment, and then disappears.