User’s Guide
cTOUR action
This is a function for putting out the Tour Switching program set up in the matrix switcher on the monitor of your discretion.
First, select the monitor you intend to put out, and when you press TOUR+NO.+ENTER, the visuals corresponded to the pertinent Tour program get automatically converted, “TOUR [NO] RUN” get indicated in the LCD.
If you press Hold in the tour run state, the automatic conversion actions get stopped, and “TOUR [NO] HOLD” gets indicated in the LCD.
If you press the NEXT or BEFORE button in this state, it gets converted to the next visuals or the previous visuals of the visuals being put out presently.
If you want to automatically convert again, press the SEQUENCE button. If you want to convert the tour mode to the manual select mode, press CAM+NO.+ENTER.
dSALVO action
This is a function for showing camera visuals corresponded to monitor groups in the Salvo program of the matrix switcher to corresponding monitors simultaneously.
If you want to select the monitor group salvo that you desire, press SALVO+NO.+ENTER.
At this time “SALVO [NO]” gets indicated in the LCD.
In this state, if you press Next or Before, it gets converted to the next Salvo No. or the previous Salvo No. All Salvo No modes get consecutively converted and “SALVO [NO] RUN” gets indicated
in the LCD. In this state, if you press Hold, it gets fixed to the previous Salvo No mode.
For conversion to the manual select mode, press CAM+NO.+ENTER.
20