User’s Guide
3) Manipulating the RECEIVER UNIT
aFor receiver unit manipulation, as only those applying to the cam no. indicated in the LCD are possible, first select the camera you wan to manipulate. For camera selection, when you press CAM + NO. + ENTER, the concerned camera number gets indicated in the LCD. (The camera number is the address number of the receiver unit)
bIn the third line of the LCD, the camera's action state gets indicated. Initially, it appears as “MANUAL”. And, in this state, by using the Joy Stick and Lens control buttons, you can manipulate the light turning mark and the lens.
cPRESET action
This is a function for selecting and watching the preset POSITION set
up in the receiver unit. If you want to select the preset position you want, press the PRESET button, put in the appropriate number in the position you want, and press the ENTER button. At this time, the LED of the PRESET button gets turned on, “Pattern [ ]” gets indicated in the LCD. If you want to cancel the preset, press the PRESET button once again.
dAUX power control
This is a function for manipulating the aux power of the receiver unit. If you want to put out the power of AUX1~AUX4, press the appropriate AUX button. At this time, in the fourth line of the LCD, the appropriate aux gets indicated. If you want to cancel the aux power output, press the appropriate AUX button.
18