SETTING MENU1
– SETTING PROGRAM REC
6 | PROGRAM SETUP 1 | • How to set a PROGRAM REC |
| example) To set up a programmed recording | |
| from 13:03 to 13:15 on Monday in |
the L6H mode.
6 PROGRAM SETUP 2
•When 5 program is set in the PROGRAM SETUP 1, select
PROGRAM SETUP 2.
•Use the same method for setting PROGRAM REC as in the
PROGRAM SETUP 1.
| PROGRAM SETUP1 |
| |||
• ¤ | START | STOP | DATE | MODE | |
13:03 | → 13:15 | MON | L6H | ||
• | 13:03 | → 13:15 | DAILY | L18H | |
• |
|
|
|
|
|
• | OFF |
|
|
|
|
• | 13:03 | → | 13:15 | MON | L30H |
• | PROGRAM SETUP2 |
| |||
|
|
| |||
( | ¤ /– +,CLEAR) | END:MENU |
CAUTION
1. You can use only the POWER or RESET |
buttons during PROGRAM REC. |
2. During a PROGRAM REC, to |
cancel the recording press the POWER |
button. |
3. To cancel a PROGRAM REC, select the |
event and press CLEAR button to display |
1. Press the SHIFT button to move the cursor to the vacant program position.
2.Press the SHIFT ¤ button to display the current time.
3.Press the TRACKING/SET "+" or
4.Press the SHIFT ¤ button to move to the minute.
5.Press the TRACKING/SET "+" or
6.By the same methode, set up the ending time and move to the date.
7.Press the TRACKING/SET "+" or
PROGRAM SETUP2
START STOP DATE MODE
• ¤
•
•
•
•
• PROGRAM SETUP1
( ¤ /– +,CLEAR) | END:MENU |
*When finished with PROGRAM SETUP 1, 2 press MENU to end and press POWER to begin standby.
MENU
POWER
REC
REC
C.MEMO
*The tape will be ejected and the beeper will sound if the tape safety tab has been removed.
"OFF". |
Pressing the SHIFT ¤ button again in |
the OFF position to toggles the time set |
before. |
8. Press the SHIFT | button to set L6H and |
press SHIFT ¤ | button. |
9. By the same method, set up the NEXT |
– CHECKING POWER FAILURE TIME AND DATE.
PROGRAM REC which you may want. |
•DLY : The programmed recording is made at the same time every day.
7 POWER LOSS MEMORY
•Displays the memorized time of a power failure and power restore.
* example) If there was a power failure on 17:30:30 12. 23. 2002, |
and a power restore on 17:40:00 12. 23. 2002. |
REFERENCE
| POWER LOSS MEMORY | |||
• |
| YEAR | DATE | TIME |
OFF | 2002 | 12/25 | 15:00:00 | |
• | ON | 2002 | 12/25 | 15:15:37 |
OFF | 2002 | 12/24 | 13:25:00 | |
• | ON | 2002 | 12/24 | 13:26:37 |
OFF | 2002 | 12/23 | 17:30:30 | |
| ON | 2002 | 12/23 | 17:40:00 |
(17:30:30= 17 Hours 30 minutes 30 seconds) |
* example) If there was a power failure on 13:25:00 12. 24. 2002 |
and a power restore on 13:26:00 12. 24. 2002, |
repeatedly. |
You can set up to 10 programs a week
1. OFF 2002 12/24 13:25:00
END:MENUON 2002 12/24 13:26:00 2. OFF 2002 12/23 17:30:30 ON 2002 12/23 17:40:30
3.OFF ON
•The screen displays the three most recent events. The most recent power failure is listed first.
19 | 20 |