SETTING MENU
– SETTING DISPLAY AND ALARM REC
2 DISPLAY MODE SETUP
| DISPLAY MODE SETUP | • DATE: Select date display ON/OFF | ||||||
|
| ON |
|
| OFF |
| ||
1 ¤ DATE DISPLAY |
|
|
|
| ||||
2 | TIME | (ON) |
| 12:45:30 L6H | ||||
3 | POSITION |
| ||||||
| 12:45:30 L 6 H |
|
|
| ||||
|
|
|
|
|
|
| ||
|
|
| • TIME: Select time display ON/OFF | |||||
|
|
|
|
|
|
|
|
|
|
|
|
| ON |
| OFF | ||
( | ¤ ) | END:MENU | ||||||
|
|
|
| 12:45:30 L 6 H |
|
|
|
3ALARM REC SETUP
1 ¤ | ALARM REC SETUP/RECALL | |
MODE | (L6H) | |
2 | DURATION | (AUTO) |
3 | BUZZER | (ON) |
4 | ALARM RECALL |
|
( ¤ /– +) | END:MENU |
•MODE: Select ALARM REC speed. Select L6H, L18H, L30H or OFF. OFF: This unit does not Alarm REC
whether Alarm signal comes in or not.
•DURATION: Set ALARM REC time.
AUTO
SEL 3MIN
TAPE END
• To set ALARM REC time. |
Adjust the time from SEL 20SEC to |
5 MIN using the "set |
MENU
(example)
*To turn the time on or off
1. Place the " ¤ " Sign in the "TIME DISPLAY" position using the SHIFT button.
2. Press the SHIFT ¤ button to toggle the time ON and OFF.
(The DATE and POSITION work in the same way.)
•POSITION: Select position of date & time on the screen.
| 9:16:14 L 6 H |
| 9:16:14 L 6 H | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| 9:16:14 L 6 H |
| 9: 16:14 L 6 H |
*To set ALARM REC in L6H mode for 5 minutes.
1.Place the " ¤ " sign in the "DURATION" position using
the SHIFT button.
2.With each press of the SHIFT ¤ button the display changes "SEL 3 MIN".
3.Select "SEL 5 MIN" using the SET "+" button.
4.Press the MENU button.
• AUTO: If an alarm signal is received, |
ALARM REC will begin and continue |
until the alarm signal is interrupted. The |
ALARM REC will then stop (It will not |
be cancelled within 1 minute). |
• TAPE END: If an alarm signal is |
received, ALARM REC will begin and |
continue to the end of the tape. |
• BUZZER: Selects if the beeper sound is on or off |
during ALARM REC. |
• ALARM RECALL : Check Alarm recording. |
(Refer to 33 page)
15 | 16 |