CONNECTIONS
++Auto Power Link
If you have connected the main unit to a TV with a digital optical cable, set the Auto Power function ON to have the Soundbar turn on automatically when you turn the TV on.
AUTO POWER LINK | Display |
ON | OFF - ANYNET+ / ON - POWER LINK |
OFF | ON - ANYNET+ / OFF - POWER LINK |
1.Connect the Soundbar and a TV with an Optical cable (not supplied).
2. Press the (Source) button on the main unit’s top panel or the SOURCE button on the remote control to select the D.IN mode.
3.Press the Anynet+ button on the remote control to toggle the Auto Power Link function on and off.
●● Depending on the connected device, Auto Power Link may not function.
TV SOUNDCONNECT
You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV SoundConnect function.
Connect
1.Turn on the TV and Soundbar.
•Turn on the menu of the TV.
•Move to Speaker Settings on "Sound" tab.
•Set the "Add New Device" menu to "On".
2. Press the 
(Source) button on the main unit’s top panel or the SOURCE button on the remote control to select the TV mode.
3.On the TV, a message asking whether to enable the TV SoundConnect function appears.
4.Select <Yes> to finish connecting the TV and Soundbar using the TV's remote control.
●● Switching the Soundbar’s mode from TV to another mode automatically terminates TV SoundConnect. ●● To connect the Soundbar to another TV, the existing connection must be terminated.
●● Terminate the connection to the existing TV, and then press the p button on the remote control for 5 seconds to connect to another TV.
ENG
19