Samsung HW-H751/UM Using the Network Standby On function, Using the Auto Power Link Function

Page 28

FUNCTIONS

Using the Network Standby On function

The Network Standby On function becomes available if wireless connection was properly established between the smart device and Soundbar. This function turns on the Soundbar automatically when a smart device attempts to connect to the Soundbar via Bluetooth or Wi-Fi. If the Soundbar was turned on via Bluetooth connection, its input mode is set to BT automatically. Turning on the Soundbar via Wi-Fi is available only by using the App.

For further information, refer to the Web manual.

1.Connect the Smart device to your Soundbar.

2.Turn the Network Standby On function on by pressing the ] button on the Soundbar remote for more than 5 seconds. You can turn the function off by pressing the ] button again for more than 5 seconds.

●● Available only if the Soundbar is listed among the Smart device’s paired devices. (The Smart device and the Soundbar must have been previously paired at least once.)

●● Soundbar will appear in the Smart device’s searched devices list only when the Soundbar is displaying [BT READY] or [WiFi READY].

●● In the TV SoundConnect mode, the Soundbar cannot be paired to another Smart device.

●● If Network Standby On function did not work --The Network Standby On is set to Off.

●● Wi-Fi connection to the Soundbar will be terminated if its power cord was disconnected or the power was cut off. Turn on the Soundbar and reconnect.

Using the AUTO POWER LINK Function

If Soundbar was connected to an external device with optical cable, AUTO POWER LINK

function can be used. If you connect the main unit to a TV with a digital optical cable, set

the Auto Power function ON to have the Soundbar turn on automatically when you turn the

TV on.

 

 

1. Connect the Soundbar and an External

 

 

AUTO POWER LINK

Display

Device with an Optical cable.

 

 

2. Press and hold the DIMMER/Anynet+

ON

ANYNET+ OFF /

button for over 5 seconds to toggle the

 

POWER LINK ON

function.

OFF

ANYNET+ ON /

 

POWER LINK OFF

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Wireless Audio Soundbar Features TV SoundConnectLicenses ++CopyrightSafety information PrecautionsENG Contents ++Safety Instructions and Troubleshooting Getting startedBefore reading the user’s manual ++Icons used in this manualDescriptions Front/Bottom panelRear Panel SPK ADD ButtonRemote control Remote Control Buttons and FunctionsWoofer You can control the woofer volume Soundbar is a Samsung proprietary name++Installing the Batteries in the Remote Control Connecting the Wireless Subwoofer ConnectionsCm away from the core Unlock and open the ferrite coreClicks Connecting an External Device using an Hdmi cable Hdmi OUT TVOptical Assembling the cable clip Connecting to the AUXPress the button on the main unit’s front panel or Input mode Remote control to select the mode you wantSeconds in AUX mode FunctionsARC Hdmi OUT Connecting with Bluetooth Function ++To connect the Soundbar to a Bluetooth device++To disconnect the Bluetooth device from the Soundbar ++To disconnect the Soundbar from the Bluetooth deviceMore About Bluetooth ++Connecting with NFC and smart devices Connecting with NFC Function++Disconnecting NFC Functions ++Connecting a TV to the Soundbar Connecting with TV SoundConnect functionPress Button on the main unit’s front panel or Functions Device Using the Network Standby On function Using the Auto Power Link FunctionDisconnect the power cord, reconnect it and turn it on Software update++Updating with USB ++Auto update Installing the Samsung Multiroom App ++Accessing the Samsung Multiroom AppMultiroom Link ++Android or iOSDisconnect the Function Connection from the App Connecting Without a Wireless Router Not Included ++Connecting the Soundbar to Your Network with a LAN CableFollow the 1 to 3 steps as shown on the previous page. See Select WPS from the network type, and then press NextSelect SamsungSpeaker 2013 or SamsungSoundbar Adding an Soundbar Connecting with a HUB Not Included Multiroom Link ENG Wireless router Adding a HUBRelocating the Soundbar Without a HUB With a HUBUsing the Samsung Multiroom App ++Switching the input source++Renaming a connected Soundbar You can rename Soundbars connected to your network++Changing the sort order of listed Soundbar ++Grouping Soundbar ++Listening to Surround Sound Using Several Audio Devices Test and adjust speaker volume and press Done ++Playing a Song ++Sorting the song ++Creating a Playlist ENG ++Setting Presets ++Listening to a radio stationSelected radio station is added to the Presets list ++Setting the Default Radio Stations in Speaker Preset ++Searching for a Radio StationSelect Services You can play music from content providers ++Playing music from content providers++Playing music from a selected device Playing Media Content Saved in a PC ++Samsung Link++Wireless Audio Multiroom for Desktop Multiroom Link Using the Multiroom Settings Menu Select App Tutorial to learn how to use the app++Guide Press the buttonDisplays a list of available services ++ServicesGives you access to TuneIn Radio ++Speaker Settings Add SpeakerSet the Software Auto Update setting to On For each Soundbar with an outdated software versionLets you set the Sleep Timer Lets you set the Alarm++Clock Lets you check the Device ID ++SupportProvides a link to the Samsung website ++Open Source Licenses ++App VersionLets you view the Open Source Licenses Lets you view the App VersionTroubleshooting HUB doesnt work properly Soundbar doesnt work properlyCannot group speakers App doesnt work properlyContact Samsung World Wide Area Contact Centre  Web Site ` Asia Pacific
Related manuals
Manual 4 pages 35.46 Kb Manual 66 pages 9 Kb Manual 58 pages 61.53 Kb Manual 9 pages 14.25 Kb Manual 9 pages 20.3 Kb
Top Page Image Contents