Samsung HW-H751/UM manual Adding a HUB, Relocating the Soundbar, Wireless router

Page 40

MULTIROOM LINK

Adding a HUB
An Soundbar and a HUB may not pair successfullly if the
Soundbar and HUB are too far apart or are on different floors.
In such cases, you can link two HUB's together by setting the
second HUB to Repeater mode. The additional HUB amplifies
the signal and lets you pair the Soundbar to the closest HUB.
1.	Set the HUB that is connected to the wireless router to		Soundbar
	Pairing mode by pressing its SPK ADD button for 1 second.
2.	Plug in the new HUB you are using as an extender, and
	then press its SPK ADD button for 10 seconds.		Used as a
3.	then press its SPK ADD button for 10 seconds.		extender
3.	The newly added HUB’s LED indicators turn off and on,
	and it switches to Repeater mode.
4.	Once the connection between the two HUB’s has been
	established, the added HUB’s (	) indicator stops	HUB
	blinking.

●● If your smart device is not connected to the wireless router with a Wi-Fi connection, the Soundbar will not appear on the Samsung Multiroom app.

●● Place the HUB that is in Repeater mode in an appropriate location between the Soundbar and the HUB that is connected to the wireless router.

●● You can set only one HUB to Repeater mode.

●● HUB may not be commercially available depending on country or region. To purchase, contact the distributor or Samsung Service Centre.

Relocating the Soundbar

When relocating your Soundbar, refer to the below table.

Wireless router

HUB

Without a HUB

With a HUB

If you want to connect your Soundbar to the current wireless router.

Turn off the Soundbar, relocate it and then turn it on.

40

If you want to connect your

Soundbar to a different

wireless router.

Turn off the Soundbar, relocate it, then establish the new connection as described in the installation instructions on page 33~39. Connect a LAN cable between the HUB and the new wireless router, turn on the HUB, and follow "Adding an extra Soundbar to a HUB that is connected to an Soundbar" (page 36) step.

Image 40

Contents Wireless Audio Soundbar Features TV SoundConnectLicenses ++CopyrightSafety information PrecautionsENG Contents ++Safety Instructions and Troubleshooting Getting startedBefore reading the user’s manual ++Icons used in this manualDescriptions Front/Bottom panelRear Panel SPK ADD ButtonRemote control Remote Control Buttons and FunctionsWoofer You can control the woofer volume Soundbar is a Samsung proprietary name++Installing the Batteries in the Remote Control Connecting the Wireless Subwoofer ConnectionsCm away from the core Unlock and open the ferrite coreClicks Connecting an External Device using an Hdmi cable Hdmi OUT TVOptical Assembling the cable clip Connecting to the AUXPress the button on the main unit’s front panel or Input mode Remote control to select the mode you wantSeconds in AUX mode FunctionsARC Hdmi OUT Connecting with Bluetooth Function ++To connect the Soundbar to a Bluetooth device++To disconnect the Bluetooth device from the Soundbar ++To disconnect the Soundbar from the Bluetooth deviceMore About Bluetooth ++Connecting with NFC and smart devices Connecting with NFC Function++Disconnecting NFC Functions ++Connecting a TV to the Soundbar Connecting with TV SoundConnect functionPress Button on the main unit’s front panel or Functions Device Using the Network Standby On function Using the Auto Power Link FunctionDisconnect the power cord, reconnect it and turn it on Software update++Updating with USB ++Auto update Installing the Samsung Multiroom App ++Accessing the Samsung Multiroom AppMultiroom Link ++Android or iOSDisconnect the Function Connection from the App Connecting Without a Wireless Router Not Included ++Connecting the Soundbar to Your Network with a LAN CableFollow the 1 to 3 steps as shown on the previous page. See Select WPS from the network type, and then press NextSelect SamsungSpeaker 2013 or SamsungSoundbar Adding an Soundbar Connecting with a HUB Not Included Multiroom Link ENG Wireless router Adding a HUBRelocating the Soundbar Without a HUB With a HUBUsing the Samsung Multiroom App ++Switching the input source++Renaming a connected Soundbar You can rename Soundbars connected to your network++Changing the sort order of listed Soundbar ++Grouping Soundbar ++Listening to Surround Sound Using Several Audio Devices Test and adjust speaker volume and press Done ++Playing a Song ++Sorting the song ++Creating a Playlist ENG ++Setting Presets ++Listening to a radio stationSelected radio station is added to the Presets list ++Setting the Default Radio Stations in Speaker Preset ++Searching for a Radio StationSelect Services You can play music from content providers ++Playing music from content providers++Playing music from a selected device Playing Media Content Saved in a PC ++Samsung Link++Wireless Audio Multiroom for Desktop Multiroom Link Using the Multiroom Settings Menu Select App Tutorial to learn how to use the app++Guide Press the buttonDisplays a list of available services ++ServicesGives you access to TuneIn Radio ++Speaker Settings Add SpeakerSet the Software Auto Update setting to On For each Soundbar with an outdated software versionLets you set the Sleep Timer Lets you set the Alarm++Clock Lets you check the Device ID ++SupportProvides a link to the Samsung website ++Open Source Licenses ++App VersionLets you view the Open Source Licenses Lets you view the App VersionTroubleshooting HUB doesnt work properly Soundbar doesnt work properlyCannot group speakers App doesnt work properlyContact Samsung World Wide Area Contact Centre  Web Site ` Asia Pacific

Related manuals

Manual 4 pages 35.46 Kb

Manual 66 pages 9 Kb

Manual 58 pages 61.53 Kb

Manual 9 pages 14.25 Kb

Manual 9 pages 20.3 Kb